| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
| |
Changes default for render-test to sm_6_5.
Since sm_6_5 is the new default, remove the -use-dxil option, add
-use-dxcb option
Remove -use-dxil option from all test cases.
Add -use-dxcb to two tests that needed it.
Fixes #7611
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Add a simple interface parameter test
Since there's no documentation, it's nice to have a simple test case in order to
experiment with this feature of the testing framework.
* Add shader entry point attributes to tests
* Fix specialization arguments for tests
- Add some missing arguments
- Rremove one extraneous argument.
* Stop using deprecated compile request in render-test
Use a session object instead of the deprecated compile request object.
This closes issue #4760.
|
| |
|
|
|
|
|
|
|
| |
Some tests are now passing and are enabled.
Other tests are still failing, but are given comments categorizing the failures.
Tests in the 'Not supported in WGSL' category are also removed from the expected failures
list. (Though they are still kept disabled for WebGPU, of course.)
This closes #5519.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Warning on bool to float conversion.
* Fix test cases.
* Improve.
* LanguageServer: don't show constant value for non constant variables.
* Fix tests.
* Fix warnings in tests.
Co-authored-by: Yong He <yhe@nvidia.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change originated as an attempt to re-enable a test case, but it has ended up disabling more tests (for good reasons) than it re-enables.
The main change here is a significant overhaul of the way that the D3D12 render path extracts information from the Slang reflection API to produce a root signature.
There were also some supporting fixes in the reflection information to make sure it returns what the D3D12 back-end needed.
The big picture here is that the D3D12 path now uses the descriptor ranges stored in the reflection data more or less directly.
It still needs to use register/space offset information queried via the "old" reflection API, but it only does so at the top level now, for the program and entry points themselves.
All other layout information is derived directly from what Slang provides.
Smaller changes:
* The "flat" reflection API was expanded to include `getBindingRangeDescriptorRangeCount()` which was clearly missing.
* The "flat" reflection results for a constant buffer or parameter block that didn't contain any uniform data and was mapped to a plain constant buffer needed to be fixed up. That logic is still way to subtle to be trusted.
* Several additional tests were disabled that relied on static specialization, global/entry-point generi type parameters, structured buffers of interfaces or other features we don't officially support with shader objects right now. All of the affected tests were somehow passing by sheer luck and because they often passed in specialization arguments via explicit `TEST_INPUT` lines.
* The `inteface-shader-param` test is re-enabled now that we can properly describe its input with the new `set` mode on `TEST_INPUT`
* `ShaderCursor::getElement()` can now be used on structure types (in addition to arrays) to support by-index access to fields
* The `TEST_INPUT` system was expanded to support both by-name and by-index setting of structure fields for aggregates
* The `TEST_INPUT` system was expanded to allow an `out` prefix to mark parts of an expression as outputs on a `set` lines
* The `TEST_INPUT` system was expanded so that anything that would be allowed on a `TEST_INPUT` line by itself (like `ubuffer(...)`) can now be used as a sub-expression on a `set` line
Co-authored-by: Yong He <yonghe@outlook.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Remove old code paths from render-test
Historically, the `render-test` tool was using three different code paths:
* One based on `gfx` and manual (non-reflection-based) parameter setting, used for OpenGL, D3D11, D3D12, and Vulkan
* One for CPU that used reflection-based parameter setting but shared no code with the first
* One for CUDA that used reflection-based parameter setting and shared some, but not all, code with the CPU path
Recently we've updated `render-test` to include a fourth option:
* Using `gfx` and the "shader object" system it exposes for a unified reflection-based parameter-setting system taht works across OpenGL, D3D11, D3D12, Vulkan, CUDA, and CPU
This change removes the first three options and leaves only the single unified path. A sa result, a bunch of code in `render-test` is no longer needed, and the codebase no longer relies on things like the `IDescriptorSet`-related APIs in `gfx`.
Several existing tests had to be disabled to make this change possible. Those tests will need to be audited and either re-enabled once we fix issues in the shader object system, or permanently removed if they don't test stuff we intend to support in the long run (e.g., global-scope type parameters, which aren't a clear necessity).
* fixup: CUDA detection logic
|
| |
|
|
|
|
|
|
|
| |
* Add shader object parameter binding to renderer_test.
* remove multiple-definitions.hlsl
* Fix cuda implementation.
Co-authored-by: Tim Foley <tfoleyNV@users.noreply.github.com>
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Overview
========
Prior to this change, we had two different code generation strategies for interface/existential types in Slang, that didn't always play nicely together:
* The "legacy" static specialization approach could handle plugging in an arbitrary concrete type for an existential type parameter (including types with resources, etc.), but wouldn't work well with things like a `StructuredBuffer<>` of an interface type, and requires somewhat counter-intuitive layout rules to make work.
* The new dynamic dispatch approach produces simpler, more easily understood layouts by assuming that values of interface type can fit into a fixed number of bytes. The tradeoff there is that it cannot handle types that include resources (only POD types).
The goal of this change is to make it so that the two strategies can co-exist. In particular, in cases where a shader is amenable to both static specialization and dynamic dispatch, the type layouts should agree.
In order to make the type layouts agree, we:
* Declare that *all* values of existential type reserve storage according to the dynamic-dispatch rules (so 16 bytes for the RTTI and witness-table information, plus whatever bytes are needed to story "any value" of a conforming type).
* Then we modify the "legacy" layout rules so that if a value of concrete type can fit in the reserved "any value" space for a given interface, then it is laid out there exactly like the dynamic dispatch rules would do. Otherwise, we fall back to the previous legacy rules (since we don't need to agree with the dynamic-dispatch layout on types that can't be used with dynamic dispatch).
Details
=======
* Renamed `ExistentialBox` to `BoundInterfaceType` to better clarify how it relates to `BindExistentialsType`
* Unconditionally apply the `lowerGenerics` pass during emit, since it is now responsible for aspects of the lowering of existential types when specialization is used.
* Made IR type layout take the target into account, so that the layout of resource types can vary by target (e.g., being POD on some targets, and invalid on others)
* Cleaned up some issues around using global shader parameters as the "key" for their layout information in the global-scope layout (only comes up when there are global-scope `uniform` parameters)
* Made there be a default any-value size (16) instead of making it be an error to leave out. This was the simplest option; we could try to go back to having an error, but we'd need to only issue it if we are sure a type/interface is being used with dynamic dispatch, since static dispatch doesn't have to obey the restrictions.
* Changed lowering of existential types to tuples so that bound interfaces where the concrete type won't fit use a "pseudo-pointer" instead of an "any-value" to hold the payload
* Changed IR type legalization to handle the "pseudo-pointer" case and apply layout information from an interface type over to the payload part when static specialization was used.
* Changed some details of how witness tables were being lowered, so that we didn't have to create "proxy" witness tables for the constraints on associated types (just use the actual requirement entries we generate)
* Changed witness tables so that they know the subtype doing the conforming
* Added logic so that we don't generate pack/unpack logic and witness table wrapper functions for types that are incompatible with any-value/dynamic dispatch for a given interface.
* Changed the core AST-level type layout logic to use the dynamic-dispatch layout in case things fit, and the legacy static specialization case when things don't (while also reserving space for the dynamic-dispatch fields)
* Changed a bunch of test cases for static specialization to properly use the new layout (which introduces new buffers in some cases, and moves data around in others).
Future Work
===========
The experience of trying to reconcile our older way of handling interface-type specialization with our newer model (that supports dynamic dispatch) makes it clear that we really need to make similar changes to our handling of generic type parameters on entry points and at the global scope.
A future change should make it so that a global type parameter is lowered with a type layout similar to a value parameter of interface type, including the RTTI and witness-table pieces, and just leaving out the "any value" piece. A similar translation strategy should apply to entry-point generic parameters (mirroring how we lower generic functions for dynamic dispatch already), and value specialization parameters.
Co-authored-by: Yong He <yonghe@outlook.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The `TEST_INPUT` facility allows textual Slang test cases to provide two kinds of information to the `render-test` tool:
1. Information on what shader inputs exist
2. Information on what values/objects to bind into those shader inputs
Under the first category of information, there exists supporting for attaching a `dxbinding(...)` annotation to a `TEST_INPUT` which seemingly indicates what HLSL `register` the input uses. There is a similar `glbinding(...)` annotation, used for OpenGL and Vulkan.
It turns out that these annotations were, in practice, completely ignored and had no bearing on how `render-test` allocates or bindings graphics API objects. There was some amount of code attempting to validate that explicit registers/bindings were being set appropriately, but the actual values were being ignored.
The visible consequence of the `dxbinding` and `glbinding` annotations being ignored is issue #1036: the order of `TEST_INPUT` lines was *de facto* determining the registers/bindings that were being used by `render-test`.
This change simply removes the placebo features and strips things down to what is implemented in practice: the `TEST_INPUT` lines do not need target-API-specific binding/register numbers, because their order in the file implicitly defines them.
I added logic to the parsing of `TEST_INPUT` lines to make sure I got an error message on any leftover annotations, and went ahead and systematicaly deleted all of the placebo annotations from our test cases.
If we decide to make `TEST_INPUT` lines *not* depend on order of declaration in the future, we can build it up as a new and better considered feature.
The main alternative I considered was to keep the annotations in place, and change `render-test` and the `gfx` abstraction layer to properly respect them, but that path actually creates much more opportunity for breakage (since every single test case would suddenly be specifying its root signature / pipeline layout via a different path using data that has never been tested). The approach in this change has the benefit of giving me high confidence that all the test cases continue to work just as they had before.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Add support for '=' when defining a name in test.
* Add support for double intrinsics.
* Add support for asdouble
Add findOrAddInst - used instead of findOrEmitHoistableInst, for nominal instructions.
Support cloning of string literals.
C++ working on more compute tests.
* Constant buffer support in reflection.
Fixed debugging into source for generated C++.
buffer-layout.slang works.
* Added cpu test result.
* Remove some commented out code.
Comment on next fixes.
* Improvements to reflection CPU code.
* C++ working with ByteAddressBuffer.
* Enabled more compute tests for CPU.
* Enabled more compute tests on CPU.
Added support for [] style access to a vector.
* Enabled more CPU compute tests.
* Handling of buffer-type-splitting.slang
Named buffers can be paths to resources
* Fix some warnings, remove some dead code.
* Fix problem with verification of number of operands for asuint/asint as they can have 1 or 3 operands. asdouble takes 2.
* Fix handling in MemoryArena around aligned allocations. That _allocateAlignedFromNewBlock assumed the block allocated has the aligment that was requested and so did not correct the start address.
|
|
|
* First steps toward supporting interface-type parameters on shaders
What's New
----------
From the perspective of a user, the main thing this change adds is the ability to declare top-level shader parameters (either at global scope, or in an entry-point parameter list) with interface types. For example, the following becomes possible:
```hlsl
// Define an interface to modify values
interface IModifier { float4 modify(float4 val); }
// Define some concrete implementations
struct Doubler : IModifier
{
float4 modify(float4 val) { return val + val; }
}
struct Squarer : IModifier { ... }
// Define a global shader parameter of interface type
IModifier gGlobalModifier;
// Define an entry point with an interface-type `uniform` parameter
void myShader(
unifrom IModifier entryPointModifier,
float4 inColor : COLOR,
out float4 outColor : SV_Target)
{
// Use the interface-type parameters to compute things
float4 color = inColor;
color = gGlobalModifier.modify(color);
color = entryPointModifier.modify(color);
outColor = color;
}
```
The user can specialize that shader by specifying the concrete types to use for global and entry-point parameters of interface types (e.g., plugging in `Doubler` for `gGlobalModifier` and `Squarer` for `entryPointModifier`).
The "plugging in" process is done in terms of a concept of both global and local "existential slots" which are a new `LayoutResourceKind` that represents the holes where concrete types need to be plugged in for existential/interface types.
In simple cases like the above, each interface-type parameter will yield a single existential slot in either the global or entry-point parameter layout. Users can query the start slot and number of slots for each shader parameter, just like they would for any other resource that a parameter can consume. Before generating specialized code, the user plugs in the name of the concrete type they would like to use for each slot using `spSetTypeNameForGlobalExistentialSlot` and/or `spSetTypeNameForEntryPointExistentialSlot`.
There are some major limitations to the implementation in this first change:
* Parameters must be of interface type (e.g., `IFoo`) and not an array (`IFoo[3]`), or buffer (`ConstantBuffer<IFoo>`) over an interface type. Similarly, `struct` types with interface-type fields still don't work.
* The work on interface-type function parameters still doesn't include support for `out` or `inout` parameters, nor for functions that return interface types (that isn't technically related to this change, but affects its usefullness).
* No work is being done to correctly lay out shader parameters once the concrete types for existential slots are known, so that this change really only works when the concrete type that gets plugged in is empty.
These limitations are severe enough that this feature isn't really usable as implemented in this change, and this merely represents a stepping stone toward a more complete implementation.
Implementation
--------------
The API side of thing largely mirrors what was already done to support passing strings for the type names to use for global/entry-point generic arguments, so there should be no major surprises there.
The logic in `check.cpp` computes the list of existential slots when creating unspecialized `Program`s and `EntryPoint`s (this is logically the "front end" of the compiler), and then checks the supplied argument types against what is expected in each slot when creating specialized `Program`s and `EntryPoint`s. This again mirrors how generic arguments are handled.
Type layout was extended to compute the number of existential slots that a type consumes, and will thus automatically assign ranges of slots to top-level and entry-point shader parameters in the same way it already allocates `register`s and `binding`s. The big missing feature is the ability to specialize a layout to account for the concrete types plugged into the existential-type slots.
IR generation for specialized programs and entry points was slightly extended so that it attaches information about the concrete types plugged into the existential slots, and the witness tables that show how they conform to the interface for that slot. The linking step needed some small tweaks to make sure that information gets copied over to the target-specific program when we start code generation.
The meat of the IR-level work is in `ir-bind-existentials.cpp`, which takes the information that was placed in the IR module by the generation/linking steps and uses it to rewrite shader parameters. For example, if there is a shader parameter `p` of type `IModifier`, and the corresponding existential slot has the type `Doubler` in it, we will rewrite the parameter to have type `Doubler`, and rewrite any uses of `p` to instead use `makeExistential(p, /*witness that Doubler conforms to IModifier*/)`.
Once the replacement is done on the parameters, the existing work for specializing existential-based code when the input type(s) are known kicks in and does the rest.
Testing
-------
A single compute test is added to validate that this feature works. It is narrowly tailored to not require any of the features not supported by the initial implementation (e.g., all of the concrete types used have no members).
The test case *does* include use of an associated type through one of these existential-type parameters, which has exposed a subtle bug in how "opening" of existential values is implemented in the front-end. Rather than fix the underlying problem, I cleaned up the code in the front-end to special case when the existential value being opened is a variable bound with `let`, to directly use a reference to that variable rather than introduce a temporary. Similarly, in the IR generation step, I added an optimization to make variables declared with `let` skip introducing an IR-level variable and just use the SSA value of their initializer directly instead.
* fixup: missing files
* fixup: incorrect type for unreachable return
* fixup: actually comment ir-bind-existentials.cpp
|
