| Age | Commit message (Collapse) | Author |
|---|
|
enabling VK1.4. (#1297)
Fixed wave-lane-at.slang test to test with laneId that is uniform across the Wave.
|
|
The Slang compiler was bit by a known issue when translating from SSA form back to straight-line code. Give code like the following:
int x = 0;
int y = 1;
while(...)
{
...
int t = x;
x = y;
y = t;
}
...
The SSA construction pass will eliminate the temporary `t` and yield code something like:
br(b, 0, 1);
block b(param x : Int, param y : Int):
...
br(b, y, x);
The loop-dependent variables have become parameters of the loop block, and the branchs to the top of the loop pass the appropriate values for the next iteration (e.g., the jump that starts the loop sends in `0` and `1`).
The problem comes up when translating the back-edge the continues the loop out of SSA form. Our generated code will re-introduce temporaries for `x` and `y`:
int x;
int y;
// jump into loop becomes:
x = 0;
y = 1;
for(;;)
{
...
// back-edge becomes
x = y;
y = x;
continue;
}
The problem there is that we've naively translated a branch like `br(b, <a>, <b>)` into `x = <a>; y = <b>;` but that doesn't work correctly in the case where `<b>` is `x`, because we will have already clobbered the value of `x` with `<a>`.
The simplest fix is to introduce a temporary (just like the input code had), and generate:
// back-edge becomes
int t = x;
x = y;
y = t;
This change modifies the `emitPhiVarAssignments()` function so that it detects bad cases like the above and emits temporaries to work around the problem. A new test case is included that produced incorrect output before the change, and now produces the expected results.
A secondary change is folded in here that tries to guard against a more subtle version of the problem:
for(...)
{
...
int x1 = x + 1;
int y1 = y + 1;
x = y1;
y = x1;
}
In this more complicated case, each of `x` and `y` is being assigned to a value derived from the other, but neither is being set using a block parameter directly, so the changes to `emitPhiVarAssignments()` do not apply.
The problem in this case would be if the `shouldFoldInstIntoUseSites()` logic decided to fold the computation of `x1` or `y1` into the branch instruction, resulting in:
x = y + 1;
y = x + 1;
which would again violate the semantics of the original code, because now there is an assignment to `x` before the computation of `x + 1`.
Right now it seems impossible to force this case to arise in practice, due to implementation details in how we generate IR code for loops. In particular, the block that computes the `x+1` and `y+1` values is currently always distinct from the block that branches back to the top of the loop, and we do not allow "folding" of sub-expressions from different blocks. It is possible, however, that future changes to the compiler could change the form of the IR we generate and make it possible for this problem to arise.
The right fix for this issue would be to say that we should introduce a temporary for any branch argument that "involves" a block parameter (whether directly using it or using it as a sub-expression). Unfortunately, the ad hoc approach we use for folding sub-expressions today means that testing if an operand "involves" something would be both expensive and unwieldy.
A more expedient fix is to disallow *all* folding of sub-expressions into unconditional branch instructions (the ones that can pass arguments to the target block), which is what I ended up implementing in this change. Making that defensive change alters the GLSL we output for some of our cross-compilation tests, in a way that required me to update the baseline/gold GLSL.
A better long-term fix for this whole space of issues would be to have the "de-SSA" operation be something we do explicitly on the IR. Such an IR pass would still need to be careful about the first issue addressed in this change, but the second one should (in principle) be a non-issue given that our emit/folding logic already handles code with explicit mutable local variables correctly.
|
|
* Add unroll support for CUDA, and preliminary for C++.
Document [unroll] support.
* Fix loop-unroll to run on CPU, and test on CPU and elsewhere.
Fix bug in emitting loop unroll condition.
* Improved comment.
* Added support for vk/glsl loop unrolling.
|
|
* Better diagnostics on failure on CUDA.
* Catch exceptions in render-test
* * Added ability to disable reporting on CUDA failures
* Stopped using exception for reporting (just write to StdWriter::out()
* Removed CUDAResult type
* Don't set arch type on nvrtc to see if fixes CI issues.
* Try compute_30 on CUDA.
* Added ability to IGNORE_ a test
DIsabled rw-texture-simple and texture-get-dimensions
* Disable tests that require CUDA SM7.0
Use DISABLE_ prefix to disable tests.
* Disable signalUnexpectedError doing printf.
|
|
Static Method Calls
-------------------
The main fix here is for parsing of calls to static methods. Given a type like:
struct S
{
void doThing();
}
the parser currently gets tripped up on a statement like:
S::doThing();
The problem here is that the `Parser::ParseStatement` routine was using the first token of lookahead to decide what to do, and in the case where it saw a type name it assumed that must mean the statement would be a declaration.
It turns out that `Parser::ParseStatement` already had a more intelligent bit of disambiguation later on when handling the general case of an identifier (for which it couldn't determine the type-vs-value status at parse time), and simply commetning out the special-case handling of a type name and relying on the more general identifier case fixes the issue.
That catch-all case still has some issues of its own, and this change expands on the comments to make some of those issues clear so we can try to address them later.
Empty Declarators
-----------------
One reason why the static method call problem was hard to discover was that it was masked by the parser allowing for empty declarator. That is, given input like:
S::doThing();
This can be parsed as a variable declaration with a parenthesized empty declarator `()`.
Practically, there is no reason to support empty declarators anwhere except on parameters, and allowing them in other contexts could make parser errors harder to understand.
This change makes the choice of whether or not empty declarators are allowed something that can be decided at each point where we parse a declarator, and makes it so that only parsing of parameters opts in to allowing them.
By disabling support for empty declarators in contexts where they don't make sense, we make code like the above a parse error when it appears at global scope, rather than a weird semantic error.
A more complete future version of this change might *also* make support for parenthesized declarators an optional feature, or remove that support entirely. Slang doesn't actually support pointers (yet) so there is no real reason to allow parenthesized declarators right now.
One note for future generations is that using an emptye declarator on a parameter of array type can actually create an ambiguity. If the user writes:
void f(int[2][3]);
did they mean for it to be interpreted as:
void f(int a[2][3]);
or as:
void f(int[2][3] a);
or even as:
void f(int[2] a[3]);
The first case there yields a different type for `a` than the other two, but is also what we pretty much *have* to support for backwards compatibility with HLSL. Requiring all function declarations to include parameter names would eliminate this potentially confusing case.
Layout Modifiers
----------------
One of the above two syntax changes led to a regression in the output for a diagnostic test for `layout` modifiers (which are a deprecated but still functional feature from back when `slangc` supported GLSL input).
The original output of the test case seemed odd, and when I looked at the parsing logic I saw that an early-exit error case was leading to spurious error messages because it failed to consume all the tokens inside the `layout(...)`. Fixing the logic to not use an early-exit (and instead rely on the built-in recovery behavior of `Parser`) produced more desirable diagnosic output.
I changed the input file to put the `binding` and `set` specifiers on differnet lines so that the error output could show that the compiler properly tags both of the syntax errors.
|
|
These are steps towards a fix for the problem of not being able to call a static method as follows:
SomeType::someMethod();
One problem in the above is that the parser gets confused and parses an (anonynmous!) function declaration. This change doesn't address that problem, but *does* fix the problem that when checking fails to coerce `SomeType::someMethod` into a type it was triggering an unimplemented-feature exception rather than a real error message.
Another problem was that if the above is re-written to try to avoid the parser bug:
(SomeType::someMethod)();
we end up with a call where the base expression (the callee) is a `ParenExpr` and the code for handling calls wasn't expecting that. Instead, it sent the overload resolution logic into an unimplemented case that was bailing by throwing an arbitrary C++ exception instead of emitting a diagnostic.
This latter issue was fixed in two ways. First, the code path that failed to emit a diagnostic now emits a reasonable one for the unimplemented feature (this still ends up being a fatal compiler error). Second, we properly handle the case of trying to call a `ParenExpr` by unwrapping it and using the base expression instead, so that `(<func>)(<args>)` is always treated the same as `<func>(<args>)`.
|
|
* WIP compatibility docs.
* Test transpose in matrix-float.
* Small improvement to CUDA docs.
* Added some discussion around tessellation.
* Small improvements to target-compatibility.md
* Improve compatibility documentation.
Co-authored-by: Tim Foley <tfoleyNV@users.noreply.github.com>
|
|
* Added CPU support for GetDimensions on C++/CPU target.
Added texture-get-dimension.slang test
* Fix some typos.
* Update CUDA docs.
* Fix output of GetDimensions on glsl when has an array.
Disabled VK - because VK renderer doesn't support createTextureView
* Fix typo.
* Fix typo.
* Fix bad-operator-call diagnostics output.
|
|
* Added handling for empty switch body.
Added test for empty switch.
* Fix testing for case in switch.
|
|
* Remove RWTextureCube and RWTextureCubeArray - as not supported.
Put multisample code in a block to make nesting more readable.
* Replace a tab.
* Update bad-operator-call.slang.expected
|
|
Support for cs_6_5 cand cs_6_4 in profile
Added wave-multi-prefix.slang etst
|
|
* Define compound intrinsic ops in the standard library
The current stdlib code has a notion of "compound" intrinsic ops, which use the `__intrinsic_op` modifier but don't actually map to a single IR instruction.
Instead, most* of these map to multiple IR instructions using hard-coded logic in `slang-ir-lower.cpp`.
(* One special case is `kCompoundOp_Pos` that is used for unary `operator+` and that maps to *zero* IR instructions)
All of the opcodes that used to use the `kCompoundOp_` enumeration values now have definitions directly in the stdlib and use the new `[__unsafeForceInlineEarly]` attribute to ensure that they get inlined into their use sites so that the output code is as close as possible to the original.
For the most part, generating the stdlib definitions for the compound ops is straightforward, but here's some notes:
* The unary `operator+` I just defined directly in Slang code, since it doesn't share much structure with other cases
* The unary increment/decrement ops are generated as a cross product of increment/decrement and prefix/postfix. The logic is a bit messy but given that we have scalar, vector, and matrix versions to deal with it still saves code overall
* Because all the compound/assignment cases got moved out, the existing code for generating unary/binary ops can be simplified a bit
* All the no-op bit-cast operations like `asfloat(float)` are now inline identity functions
* A few other small cleanups are made by not having to worry about the compound ops (which used to be called "pseudo ops") sometimes being encoded in to the same type of value as a real IR opcode.
The one big detail here is a fix for how IR lowering works for `let` declarations: they were previously being `materialize()`d which only guarantees that they've been placed in a contiguous and addressable location, but doesn't actually convert them to an r-value. As a result a `let` declaration could accidentally capture a mutable location by reference, which is definitely *not* what we wanted it to do. Fixing this was needed to make the new postfix `++` definition work (several existing tests end up covering this).
One important forward-looking note:
One subtle (but significant) choice in this change is that we actually reduce the number of declarations in the stdlib, because instead of having the compound operators include both per-type and generic overloads (just listing scalar cases for now):
float operator+=(in out float left, float right) { ... }
int operator+=(in out int left, int right) { ... }
...
T operator+= <T:__BuiltinBlahBlah>(in out T left, T right) { ... }
We now have *only* the single generic version:
T operator+= <T:__BuiltinBlahBlah>(in out T left, T right) { ... }
In running our current tests, this change didn't lead to any regressions (perhaps surprisingly).
Given that we were able to reduce the number of overloads for `operator+=` by a factor of N (where N is the number of built-in types), it seems worth considering whether we could also reduce the number of overloads of `operator+` by the same factor by only having generic rather than per-type versions.
One concern that this forward-looking question raises is whether the quality of diagnostic messages around bad calls to the operators might suffer when there are only generic overloads instead of per-type overloads. In order to feel out this problem I added a test case that includes some bad operator calls both to `+=` (which is now only generic with this change) and `+` (which still has per-type overloads). Overall, I found the quality of the error messages (in terms of the candidates that get listed) isn't perfect for either, but personally I prefer the output in the generic case.
As part of adding that test, I also added some fixups to how overload resolution messages get printed, to make sure the function name is printed in more cases, and also that the candidates print more consistently. These changes affected the expected output for one other diagnostic test.
* fixup: disable bad operator test on non-Windows targets
|
|
* Implement matrix and vector versions of prefixSum and prefix product.
* Comment around how code is organized - where it seems it could be more performant.
|
|
The main feature visible to the stdlib here is the `[__unsafeForceInlineEarly]` attribute, which can be attached to a function definition and forces calls to that function to be inlined immediately after initial IR lowering.
The pass is implemented in `slang-ir-inline.{h,cpp}` and currently only handles the completely trivial case of a function with no control flow that ends with a single `return`. The lack of support for any other cases motivates the `__unsafe` prefix on the attribute.
In order to test that the pass works, I modified the "comma operator" in the standard library to be defined directly (rather than relying on special-case handling in IR lowering), and then added a test that uses that operator to make sure it generates code as expected. The compute version of the test confirms that we generate semantically correct code for the operator, while the SPIR-V cross-compilation test confirms that our output matches GLSL where the comma operator has been inlined, rather than turned into a subroutine.
Notes for the future:
* With this change it should be possible (in principle) to redefine all the compound operators in the stdlib to instead be ordinary functions with the new attribute, removing the need for `slang-compound-intrinsics.h`.
* Once the compound intrinsics are defined in the stdlib, it should be easier/possible to start making built-in operators like `+` be ordinary functions from the standpoint of the IR
* The attribute and pass here could be extended to include an alternative inlining attribute that happens later in compilation (after linking) but otherwise works the same. This could in theory be used for functions where we don't want to inline the definition into generated IR, but still want to inline things berfore generating final HlSL/GLSL/whatever.
* The inlining pass itself could be generalized to work for less trivial functions pretty easily; for the most part it would just mean "splitting" the block with the call site and then inserting clones of the blocks in the callee. Any `return` instructions in the clone would become unconditional branches (with arguments) to the block after the call (which would get a parameter to represent the returned value).
* The "hard" part for such an inlining pass would be handling cases where the control flow that results from inlining can't be handled by our later restructuring passes. The long-term fix there is to implement something like the "relooper" algorithm to restructure control flow as required for specific targets.
|
|
* Fix some typos.
* Add wave-prefix-sum.slang test
* First pass at implementing prefixSum.
* Small improvments to prefixSum CUDA.
* Small improvement to prefix sum.
* Enable prefix sum in stdlib.
* Wave prefix product without using a divide.
* Split out SM6.5 Wave intrinsics.
Template mechanism for do prefix calculations.
|
|
* Fix some typos.
* Add wave-prefix-sum.slang test
* First pass at implementing prefixSum.
* Small improvments to prefixSum CUDA.
* Small improvement to prefix sum.
* Enable prefix sum in stdlib.
|
|
* Distinguish between __activeMask and _getConvergedMask().
Remove need to pass in mask to CUDA wave impls.
* Add support for vector/matrix Wave intrinsics for CUDA.
Fix issue with CUDA parsing of errors.
* Fix typo.
Make WaveReadLineAt and WaveReadFirst work for vector/matrix types.
* Fix typo.
* Added equality wave intrinsic test.
* Fix some typos
* Added wave-lane-at.slang
|
|
* Distinguish between __activeMask and _getConvergedMask().
Remove need to pass in mask to CUDA wave impls.
* Add support for vector/matrix Wave intrinsics for CUDA.
Fix issue with CUDA parsing of errors.
* Fix typo.
|
|
The only big catch that I ran into with this batch was that I found the `float.getPi()` function was being emitted to the output GLSL even when that function wasn't being used. This seems to have been a latent problem in the earlier PR, but was only surfaced in the tests once a Slang->GLSL test started using another intrinsic that led to the `float : __BuiltinFloatingPointType` witness table being live in the IR.
The fix for the gotcha here was to add a late IR pass that basically empties out all witness tables in the IR, so that functions that are only referenced by witness tables can then be removed as dead code. This pass is something we should *not* apply if/when we start supporting real dynamic dispatch through witness tables, but that is a problem to be solved on another day.
The remaining tricky pieces of this change were:
* Needed to remember to mark functions as target intrinsics on HLSL and/or GLSL as appropriate (hopefully I caught all the cases) so they don't get emitted as source there.
* The `msad4` function in HLSL is very poorly documented, so filling in its definition was tricky. I made my best effort based on how it is described on MSDN, but it is likely that if anybody wants to rely on this function they will need us to vet our results with some tests.
|
|
* Update slang-binaries to verison with SPIR-V version support.
* Support vec and matrix Wave intrinsics on vk.
Added wave-vector.slang test
Add wave-diverge.slang test
Add support for more wave intrinsics to vk.
* Test out Wave intrinsic support for matrices.
* Remove matrix glsl intrinsics -> not available.
Fix some typo.
|
|
The actual definitions that got moved into the stdlib here are pretty few:
* `clip()`
* `cross()`
* `dxx()`, `ddy()` etc.
* `degrees()`
* `distance()`
* `dot()`
* `faceforward()`
The meat of the change is infrastructure changes required to support these new declarations
* Generic versions of the standard operators (e.g., `operator+`) were added that are generic for a type `T` that implements the matching `__Builtin`-prefixed interface. An open question is whether we can now drop the non-generic versions in favor of just having these generic operators.
* A `__BuiltinLogicalType` interface was added to capture the commonality between integers and `bool`
* `__BuiltinArithmeticType` was extended so that implementations must support initialization from an `int`
* `__BuiltinFloatingPointType` was extended to require an accessor that returns the value of pi for the given type, and the concrete floating-point types were extended to provide definitions of this value.
* It turns out that our logic for checking if two functions have the same signature (and should thus count as redeclarations/redefinitions) wasn't taking generic constraints into account at all. That was fixed with a stopgap solution that checks if the generic constraints are pairwise identical, but I didn't implement the more "correct" fix that would require canonicalizing the constraints.
* When doing overload resolution and considering potential callees, logic was added so that a non-generic candidate should always be selected over a generic one (generally the Right Thing to do), and also so that a generic candidate with fewer parameters will be selected over one with more (an approximation of the much more complicated rule we'd ideally have).
* The formatting of declarations/overloads for "ambiguous overload" errors was fleshed out a bit to include more context (the "kind" of declaration where appropriate, the return type for function declarations) and to properly space thing when outputting specialization of operator overloads that end with `<` (so that we print `func < <int>(int, int)` instead of just `func <<int,int>(int,int)`).
* The core lookup routines were heavily refactored and reorganized to try to make them bottleneck more effectively so that all paths handle all the nuances of inheritance, extensions, etc.
* Because of the refactoring to lookup logic, the semantic checking logic related to checking if a type conforms to an interface was updated to be driven based on the `Type` that is supposed to be conforming, rather than a `DeclRef` to the type's declaration. This allows it to use the type-based lookup entry point and eliminates one special-case entry point for lookup.
In addition to the various core changes, this change also refactors some of the existing stdlib code to favor writing more things in actual Slang syntax, and less in C++ code that uses `StringBuilder` to construct the Slang syntax. There is a lot more that could be done along those lines, but even pushing this far is showing that the current approach that `slang-generate` takes for how to separate meta-level C++ and Slang code isn't really ideal, so a revamp of the generator code is probably needed before I continue pushing.
One surprising casualty of the refactoring of lookup is that we no longer have the `lookedUpDecls` field in `LookupResult`. That field probably didn't belong there anyway, but the role it served was important. The idea of `lookedUpDecls` was to avoid looking up in the same interface more than once in cases where a type might have a "diamond" inheritance pattern. Removing that field doesn't appear to affect correctness of any of our existing tests, but by adding a specific test for "diamond" inheritance I could see that the refactoring introduced a regression and made looking up a member inherited along multiple paths ambiguous.
Rather than add back `lookedUpDecls` I went for a simpler (but arguably even hackier) solution where when ranking candidates from a `LookupResult` we check for identical `DeclRef`s and arbitrarily favor one over the other. One complication that arises here is that when comparing `DeclRef`s inherited along different paths they might have a `ThisTypeSubstitution` for the same type, but with different subtype witnesses (because different inheritance paths could lead to different transitive subtype witnesses: e.g., `A : B : D` and `A : C : D`).
|
|
* WIP add support for __spirv_version .
* Added IRRequireSPIRVVersionDecoration
* SPIR-V version passed to glslang.
Enable VK wave tests.
Split ExtensionTracker out, so can be cast and used externally to emit.
Added SourceResult.
* Fix warning on Clang.
* Missing hlsl.meta.h
* Refactor communication/parsing of __spirv_version with glslang.
* Fix some debug typos.
Be more precise in handling of substring handling.
* Make glslang forwards and backwards binary compatible.
* Small comment improvements.
* Added slang-spirv-target-info.h/cpp
* Fix for major/minor on gcc.
* Another fix for gcc/clang.
* VS projects include slang-spirv-target-info.h/cpp
* Removed SPIRVTargetInfo
Added SemanticVersion.
Don't bother with passing a target to glslang. Should be separate from 'version'.
* Renamed slang-emit-glsl-extension-tracker.cpp/.h -> slang-glsl-extension-tracker.cpp/.h
Fixed some VS project issues.
* Fix a comment.
* Added slang-semantic-version.cpp/.h
* Added slang-glsl-extension-tracker.cpp/.h
* Added split that can check for input has all been parsed.
* Fix problem on x86 win build.
|
|
* Test for some wave intrinsics.
More wave intrinsic support on CUDA.
* Use shfl_xor_sync.
* Improvements around wave intrinsics.
Fix built in integer types belong to __BuiltinIntegerType.
* Improvements and fixes around Wave intrinsics.
* Added WaveIsFirstLane test.
No longer use __wavemask_lt, as appears not available as an intrinsic.
* Small fixes to CUDA prelude.
* Add wave-active-product test.
Handle the special case for arbitray sums.
* Used macro to implement CUDA wave intrinsics.
|
|
* Added FloatTextureData as a mechanism to enable CPU based Texture writes.
* Add [] RWTexture access for CPU.
* Fixed rw-texture-simple.slang.expected.txt
* WIP: CUDA stdlib has support for [] surface access.
* Made IRWTexture class able to take different locations.
Doing a Texture2d access on CUDA works.
* Fix bug in outputing UniformState - was missing out padding.
Support RWTexture with array. Support RWTexture3D.
* Use * for locations for read only textures, so only need a ITexture interface.
* Fix problem around application of set/get for CUDA on subscript Texture types.
|
|
This arose when a user tried to specialize the DXR 1.1 `RayQuery` type to a local variable:
```hlsl
RAY_FLAG rayFlags = RAY_FLAG_CULL_FRONT_FACING_TRIANGLES | RAY_FLAG_CULL_NON_OPAQUE;
RayQuery<rayFlags> query;
```
In this case, we issued an error around `rayFlags` not being a constant as expected, but then we also crashes later on in checking because the `DeclRef` that was being used for the type had a null pointer for the generic argument corresponding to `rayFlags`.
The main fix here was thus to add an `ErrorIntVal` case that can be used to represent something that should be an `IntVal` but where there was some kind of error in the input code so that the actual value isn't known to the compiler.
A secondary fix here is that we were issuing error messages about expecting a constant for a parameter like `rayFlags` there *twice*, and one of those times was during the `JustChecking` part of overload resolution (when we are not supposed to emit any diagnostics). I fixed that up by allowing the `DiagnosticSink` to be used to be passed down explicitly (and allowing it to be null), while also leaving behind overloaded functions with the old signatures so that all the existing logic can continue to work unmodified.
|
|
There were two overlapping issues here:
1. We always mapped `SV_Coverage` to `gl_SampleMask`, even though `gl_SampleMaskIn` is the correct built-in variable to use for an input varying.
2. We treated `gl_SampleMask` like it was a scalar shader input, when it and `gl_SampleMaskIn` are actually arrays of indeterminate size (as a byproduct of trying to future-proof for implementations that might support hundreds or thousands of samples per pixel...)
The fix here is simple: map to either `gl_SampleMask[0]` or `gl_SampleMaskIn[0]` as appropriate. I suppose that this approach doesn't handle the possibility of eventually supporting >32 samples per pixel by having something like `uint2 coverage : SV_Coverage`, but I think we can cross that bridge when we come to it.
|
|
Within the context of an aggregate type (or an `extension` of one), the programmer can use `this` to refer to the "current" instance of the surrounding type, but there is no easy way to utter the name of the type itself. This is especially relevant inside of an `interface`, where the type of `this` isn't actually the `interface` type, but rather a placeholder for the as-yet-unknown concrete type that will implement the interface.
This change adds a keyword `This` that works similarly to `this`, but names the current *type* instead of the current instance. It can be used to declare things like binary methods or factory functions in an interface:
```
interface IBasicMathType
{
This absoluteValue();
This sumWith(This left);
}
T doSomeMath<T:IBasicMathType>(T value)
{
return value.sumWith(value.absoluteValue());
}
```
The `This` type is consistent with the type named `Self` in Rust and Swift (where Rust/Swift use `self` instead of `this`). Other names could be considered (e.g., `ThisType`) if we find that users don't like the name in this change.
|
|
This change makes it so that for a suitable type `MyType`, a variable declaration like:
MyType v;
is treated as if it were written:
MyType v = MyType();
The definition of "suitable" here is that `MyType` needs to have an available `__init` declaration that can be invoked with zero arguments. I've added a test to confirm that the new behavior works in this specific case.
There are a bunch of caveats to the feature as it stands today:
* Just because `MyType` has a zero-parameter `__init`, that doesn't mean an array type like `MyType[10]` does, so arrays currently remain uninitialized by default. Fixing this gap requires careful consideration because some, but not all, array types should be default-initializable.
* The change here should mean that a `struct` type with a field like `MyType f;` should count as having a default initial-value expression for that field, but I haven't confirmed that.
* Even if a `struct` provides initial values for all its fields (e.g., `struct S { float f = 0; }`), that doesn't mean it has a default `__init` right now, so those `struct` types will still be left uninitialized by default. Converging all this behavior is still TBD.
Just to be clear: there is no provision or plan in Slang to support destructors, RAII, copy constructors, move constructors, overloaded assignment operations, or any other features that buy heavily into the C++ model of how construction and destruction of values gets done.
In fact, I'm not even 100% sure I like having this change in place at all, and I think we should reserve the right to revert it and say that only specific stdlib types get to opt in to default initialization along these lines.
|
|
* CUDA support for array of resources.
* * Add support for Texture2DArray on CPU
* Expand texture-simple.slang to test Texture2DArray
* Reorganise CUDAComputeUtil to split out createTextureResource.
* Add TextureCubeArray support for CPU/CUDA targets.
* Pulled out CUDAResource
Renamed derived classes to reflect that change.
* Creation of SurfObject type.
* Functions to return read/write access for simplifying future additions.
* WIP for RWTexture access on CPU/CUDA.
* CUsurfObject cannot have mips.
* Ability to set number of mips on test data.
Preliminary support for CUsurfObj and RWTexture1D on CUDA.
CUDA docs improvements.
* Fix typo.
|
|
The basic idea is that the user can write:
```hlsl
struct MyThing
{
int a;
float b;
__init(int x, float y)
{
a = x;
b = y;
}
}
```
and after that point, they can create an intstance of their `MyThing` type as simply as `MyThing(123, 4.56f)`.
There was already a large amount of infrastructure laying around that is shared between ininitializers and ordinary functions, so enabling this feature mostly amounted to tying up some loose ends:
* In the parser, make sure to properly push/pop the scope for an `__init` (or `__subscript`) declaration, so parameters would be visible to the body
* In semantic checking, make sure that declaration "header" checking properly bottlenecks all the function-like cases into a base routine
* In semantic checking, make sure that the logic for checking function bodies applies to every `FunctionDeclBase` with a body, and not just `FuncDecl`s
* Update semeantic checking for statements to allow for any `FunctionDeclBase` as the parent declaration, not just a `FuncDecl`
* In lookup, treat the `this` parameter of an `__init` (well, not actually a *parameter* in this case) as being mutable, just like for a `[mutating]` method
* In IR codegen, don't just assume that all `__init`s are intrinsics, and narrow the scope of that hack to just `__init`s without bodies
* In IR codegen, detect when we are emitting an IR function for an `__init`, and in that case create a local variable to represent the `this` value, and implicitly return that value at the end of the body.
From that point on the rest of the compiler Just Works and IR codegen doesn't have to think of an `__init` as being any different than if the user had declared a `static MyThing make(...)` function.
Caveats:
* C++ users might like to use that naming convention (so `MyThing` as the name instead of `__init`). We can consider that later.
* Everybody else might prefer a keyword other than `__init` (e.g., just `init` as in Swift), but I'm keeping this as a "preview" feature for now, rather than something officially supported
* Early `return`s from the body of an `__init` aren't going to work right now.
* There is currently no provision for automatically synthesizing initializers for `struct` types based on their fields. This seems like a reasonable direction to take in the future.
* There is no provision for routing `{}`-based initializer lists over to initializer calls. The two syntaxes probably need to be unified at some point so that doing `MyType x = { a, b, c }` and `let x = MyType(a, b, c)` are semantically equivalent.
It is possible that as a byproduct of this change user-defined `__subscript`s might Just Work, but I am guessing there will still be loose ends on that front as well, so I will refrain from looking into that feature until we have a use case that calls for it.
|
|
* CUDA support for array of resources.
* * Add support for Texture2DArray on CPU
* Expand texture-simple.slang to test Texture2DArray
* Reorganise CUDAComputeUtil to split out createTextureResource.
* Add TextureCubeArray support for CPU/CUDA targets.
|
|
When a shader only uses `ParameterBlock`s plus a single buffer for root constants:
```hlsl
ParameterBlock<A> a;
ParameterBlock<B> b;
[[vk::push_constant]] cbuffer Stuff { ... }
```
we expect the push-constant buffer should not affect the `space` allocated to the parameter blocks (so `a` should get `space=0`).
This behavior wasn't being implemented correctly in `slang-parameter-binding.cpp`. There was logic to ignore certain resource kinds in entry-point parameter lists when computing whether a default space is needed, but the equivalent logic for the global scope only considered parameters that consuem whole register spaces/sets.
This change shuffles the code around and makes sure it considers a global push-constant buffer as *not* needing a default space/set.
Note that this change will have no impact on D3D targets, where `Stuff` above would always get put in `space0` because for D3D targets a push-constant buffer is no different from any other constant buffer in terms of register/space allocation.
One unrelated point that this change brings to mind is the `[[vk::push_constant]]` should ideally also be allowed to apply to an entry point (where it would modify the default/implicit constant buffer). In fact, it could be argued that push-constant allocation should be the *default* for (non-RT) entry point `uniform` parameters (while `[[vk::shader_record]]` should be the default for RT entry point `uniform` parameters).
|
|
* Add cubemap support.
* Add CUDA fence instrinsics.
* Added Gather for CUDA.
* Use the CUDA driver API as much as possible.
* * Support 1D texture on CPU
* WIP on 1D texture on CUDA
* Added simplified texture test
* Fix test.
* Improve texture-simple tests.
* * Add CPU support for 3d textures
* Add support for mip maps to CUDA
* Disable warnings in nvrtc
* Update CUDA docs
* WIP on 3d texture support.
* Add support for 3d textures for CPU and CUDA.
* CPU and CUDA support for cube maps.
* Add CPU support for Texture1DArray.
* Support CUDA Layered/Array type in meta library.
|
|
* Add cubemap support.
* Add CUDA fence instrinsics.
* Added Gather for CUDA.
* Use the CUDA driver API as much as possible.
* * Support 1D texture on CPU
* WIP on 1D texture on CUDA
* Added simplified texture test
* Fix test.
* Improve texture-simple tests.
* * Add CPU support for 3d textures
* Add support for mip maps to CUDA
* Disable warnings in nvrtc
* Update CUDA docs
* WIP on 3d texture support.
* Add support for 3d textures for CPU and CUDA.
|
|
* Add cubemap support.
* Add CUDA fence instrinsics.
* Added Gather for CUDA.
* Use the CUDA driver API as much as possible.
* * Support 1D texture on CPU
* WIP on 1D texture on CUDA
* Added simplified texture test
* Fix test.
* Improve texture-simple tests.
Co-authored-by: Tim Foley <tfoleyNV@users.noreply.github.com>
|
|
* Test to check fix
|
|
* Added 'truncate' for fixing floats, for floats near the max value (as opposed to making infinite).
Put AreNearlyEqual into Math
* Test for ::make static method.
|
|
* Added support ldexp.
* Added classify-float.slang test
Fixed glsl output.
* Added classify-double.slang
* Added ldexp test to scalar-double.slang
* isnan, isinf, isfinite are macros (on some targets) so remove :: prefix.
|
|
* * Improved fastRemoveAt
* Fixed off by one bug
* Fixed const safeness with List<>
* Made List begin and end const safe.
* Revert to previous RefPtr usage.
* Fix bug with casting.
* Tabs -> spaces.
Small fixes/improvements to List.
* Improve comment on List.
* Group shared/atomic test works on CUDA.
* * Enabled CUDA tests for atomics tests
* Enabled DX12 test for atomics-buffer.slang
Not clear just yet how to implement that for CUDA - it will work with StructuredBuffer.
* hasContent -> isNonEmpty
* Remove unneeded comment.
|
|
We had been translating an `SV_PrimitiveID` input in a shader over to `gl_PrimitiveID` in GLSL.
That translation seemed to work just fine for users, so we thought it was correct.
It turns out that `gl_PrimitiveID` is the correct GLSL for a primitive ID input in every stage *except* a geometry shader.
In a geometry shader, `gl_PrimitiveID` is a primitive ID *output*, and if you want the input case you have to write `gl_PrimitiveIDIn` (note the `In` suffix).
This change sets aside my bewilderment at the above long enough to implement a workaround in the GLSL legalization step.
I also modified our current geometry shader cross compilation test to make use of an input primitive ID.
|
|
This change adds support for the `[[vk::location(...)]]` and `[[vk::index(...)]]` attributes, which can be used together to mark up shader outputs for dual-source blending on Vulkan. HLSL/Slang code like the following:
```hlsl
struct Output
{
[[vk::location(0)]]
float4 a : SV_Target0;
[[vk::location(0), vk::index(1)]]
float4 b : SV_Target1;
}
[shader("fragment")]
Output main(...) { ...}
```
can be used to set up dual-source blending on both D3D and Vulkan APIs. The output GLSL for the above will look something like:
```glsl
layout(location = 0) out vec4 a;
layout(location = 0, index = 1) out vec4 b;
void main() { ... }
```
The more or less straightforward parts of this change were:
* Added new `attribute_syntax` declarations to the stdlib, for `[[vk::location(...)]]` and `[[vk::index(...)]]`
* Added new AST node types for the new attribute cases, sharing a base class so that argument checking can be shared
* Added checks for the arguments to the new attributes in `slang-check-modifier.cpp` (eventually this kind of logic shouldn't be needed for new attributes)
* Updated GLSL emit logic so that it treats the `index`/`space` parts of a variable layout as the `location`/`index` for varying parameters.
* Updated GLSL legalization so that when it translates entry-point parameters into globals (and scalarizes structures) it handles both a binding index and space for the parameters.
* Added a cross-compilation test case to verify that the basics of the feature work
The remaining work is all in `slang-parameter-binding.cpp`.
There is some work that isn't technically related to this change (and which could be reverted if it causes problems), around the detection and handling of fragment shader outputs with `SV_Target` semantics. The basic changes (which could be backed out and then merged separately) are:
* Made the special-case `SV_Target` logic only trigger for fragment shaders (that is the only place where `SV_Target` should appear, but we weren't guarding against it)
* Made the logic to reserve a `u<N>` register for `SV_Target<N>` only trigger for D3D Shader Model 5.0 and below (since it is not required for SM 5.1 and up). This could be a breaking change for some users, but that seems unlikely.
* Fixed one test case that relied on the behavior of reserving `u0` for `SV_Target0` even though it was a SM6.0 test.
* Also added more comments to the system-value handling logic.
The more interesting changes come up starting in `processEntryPointVaryingParameterDecl()`. The basic issue is that we have so far only supported implicit layout for varying parameters on GLSL/Vulkan, but the `[[vk::location(...)]]` attribute is a form of explicit layout annotation. Rather than try to kludge something that only works in narrow cases, I instead opted to try to fix things more generally.
In `processEntryPointVaryingParameterDecl()` we now check for the `location` and `index` attributes when we are on "Khronos" targets (Vulkan/OpenGL/GLSL) and immediately add them to the variable layout being constructed if they are found. There is nothing in this logic specific to fragment-shader outputs, so this feature now applies to any varying input/output on Khronos targets.
Allowing explicit layouts creates the potential for mixing implicit and explicit layout. For example, consider:
```hlsl
struct Output
{
float4 color : COLOR;
[[vk::location(0)]] float3 normal : NORMAL;
}
```
What `location` should `color` get? Should this code be an error? There are two cases where this conundrum can come up: when working with `struct` types used for varying parameters, and the entry-point parameter list itself.
For the varying `struct` case we currently make an expedient choice. We handle fields with both implicit or explicit layotu with appropriate logic, but logic that doesn't account for the case of mixing the two. Then at the end of layout for the `struct` we issue an error if there was a mix of implicit and explicit layout (such that our results aren't likely to be valid).
For the entry point varying parameter case, things were already using a `ScopeLayoutBuilder` type (that encapsulates some logic shared between entry-point and global parameters). The entry-point-specific bits were moved out into a `SimpleScopeLayoutBuilder` and it was updated so that rather than assuming all parameters use implicit layout it does a two-phase layout approach similar to what we use for the global scope:
* First all parameters are enumerated to collect explicit bindings and mark certain ranges as "used"
* Next the parameters are enumerated again and those without explicit bindings get allocated space using a "first fit" algorithm
In principle we could extend the two-phase approach to apply to `struct` types as well, but that would be best saved for a future refactoring of some of this parameter binding logic, since I would like to exploit more of the opportunities for sharing code across the uniform/varying and struct/entry-point/global cases.
By moving the point where entry point parameters get their offsets assigned, it was necessary to move around some of the logic that removes varying parameter usage (and other things that shouldn't "leak" out of an entry point) to a different point in the entry point layout process.
While adding these various pieces does not quite enable us to support explicit bindings on entry point parameters (e.g., putting `uniform Texture2D t : register(t0)` in an entry point parameter list) or in `struct` types (e.g., explicit `packoffset` annotations on fields), it starts to provide some of the infrastructure that we'd need in order to support those cases.
|
|
* Launch CUDA test taking into account dispatch size.
* Enable isCPUOnly hack to work on CUDA.
* Rename 'isCPUOnly' hack to 'onlyCPULikeBinding'.
* Add $T special type.
Support SampleLevel on CUDA.
* Fix typo.
|
|
* Fix CPP construct when matrix type.
* Test intrinsics on float matrices.
* Fix typo in _areNearlyEqual test. Increased default sensitivity.
Added matrix-float test.
* Matrix double test.
Fixed some issues with CUDA.
* Added reduced intrinsic version of matrix-double test.
* Improve matrix double coverage.
Test reflect/length etc on vector float.
* * Added literal-float test.
* Added vector double test
* Improved coverage of vector/matrix tests
* Disable Dx11 double-vector test because fails on CI.
* Disable literal-float, because on CI fails.
|
|
* Change handling of strings for HLSL/GLSL targets
This change switches our handling of string literals and `getStringHash` to something that is more streamlined at the cost of potentially being less general/flexible.
* `String` is now allowed as a parameter type in user-defined functions
* `getStringHash` is now allowed to apply to `String`-type values that aren't literals
* The list of strings in an IR module is now generated during IR lowering as part of lowering a string literal expression, rather than being defined by recursively walking the IR of the module looking for `getStringHash` calls. The public API still refers to these as "hashed" strings, but they are realistically now "static strings."
* When emitting code for HLSL/GLSL, the `String` type emits as `int`, and `getStringHash(x)` emits as `x`.
In terms of implementation, the choice was whether to translate `String` over to `int` in an explicit IR pass, or to lump it into the emit pass. While adding the logic to emit clutters up an already complicated step, it is ultimately much easier to make the change there than to write a clean IR pass to eliminate all `String` use.
Note that other targets that can handle a more full-featured `String` type are *not* addressed by this change and thus do not support `String` at all. It may be woth emitting `String` as `const char*` on those targets, and emitting string literals directly, but the `getStringHash` function would need to be implemented in the "prelude" then, and we probably want to pick a well-known/-documented hash algorithm before we go that far.
This change also brings along some some clean-ups to the `gpu-printing` example, since it can now take advantage of the new functionality of `String`.
* Fix up tests for new string handling
* Add global string literal list to string-literal test (since we now list *all* static string literals and not just those passed to `getStringHash`)
* Disable `getStringHash` test on CPU, since we don't have a working `String` on that platform right now (only HLSL/GLSL)
Co-authored-by: Tim Foley <tim.foley.is@gmail.com>
|
|
* Fix CPP construct when matrix type.
* Test intrinsics on float matrices.
* Fix typo in _areNearlyEqual test. Increased default sensitivity.
Added matrix-float test.
|
|
* WIP: 64 literal diagnostic and truncation.
* Improve how integer truncation is handled/supported.
Added literal-int64.slang test.
Set a suffix on all literals.
Fixed problem on C++ based targets where l suffix was not the same as int() cast. So on C++ derived emitters, int() is used instead of l suffix to have same behavior across targets.
* Add literal diagnostic testing.
* Allow lexer to lex - in front of literals.
* Fix lexing and converting int literal with -.
* Too large small values of floats become inf.
Handling writing inf types out on different targets.
Add function to deterimine if a float literals kind.
* Roll back the support of lexer lexing negative literals.
* Fixed tests broken because of diagnostics numbers.
Improved _isFinite
* Fix compilation on linux.
* Fix problem with abs on linux - use Math::Abs.
* Fix typo.
* * Improve warnings for float literals zeroed
* Improved 64 bit type documentation
* Handle half
* Improved comments
* Fixed tests broken
* Use capital letters for suffixes.
* Make default behavior on outputting a int literal that is an 'int32_t' is cast (not suffix) to avoid platform inconsistencies.
Improve documentation for 64 bit types.
Make tests cover material in docs.
* Fixed tests.
* Rename FloatKind::Normal -> Finite
* Fix half zero check.
|
|
* Improve checks and diagnostics around redeclarations
This change turns checking for redeclarations into a dedicated phase of semantic checking, and ensures that it applies to the main categories of declarations: functions, types, and variables.
Note that "variables" here includes function parameters and `struct` fields in addition to the more obvious global and local variables.
Some of the logic for checking redeclarations already existed for functions, and was refactored to deal with other cases of declarations. The checking for functions still needs to be special-cased because functions are much more flexible about the kinds of redeclarations that are allowed.
In addition to improving the diagnosis of redeclaration itself, this change also changes the error message that is produced when referencing a symbol that is ambiguous due to begin redeclared.
This is a small quality-of-life fix, and has the benefit of being much easier to implement than robust tracking of what variables have had redeclaration errors issued so that we can skip emitting an ambiguity error at the use site.
A new test case was added to cover the redeclaration cases for variables (but not types or functions), and the test for function parameters was updated to account for the new more universal diagnostic message (since function parameters used to have special-case redeclaration checking).
* fixup: missing file
|
|
The HLSL language has keywords with very common names like `triangle`, and Slang doesn't want to preclude users from using such names for their variables/functions/etc.
In addition, Slang adds new keywords on top of HLSL (like `extension`) and we don't want those to prevent us from compiling existing code.
As a result, almost all keywords in Slang are contextual keywords, and they can be shadowed by user varaibles.
The down-side to making all keywords contextual is that in a case like this:
```
int test() { return triangle; }
```
The identifier `triangle` is *not* undefined as far as lookup (it is defined as a modifier keyword), so the existing "undefined identifier" logic gets bypassed, and instead we ran into an internal compiler error trying to construct an expression that refers to a modifier keyword.
Fortunately, the internal compiler error in that case was overkill, and the compiler already had defensive logic to produce an expression with an error type if it couldn't figure out what the type of a declaration reference should be.
The main fix here is thus to emit an "undefined identifier" error instead of an internal compiler error at the point where we see an attempt to reference a declaration that shouldn't be available in an expression context.
In order to improve the quality of the diagnostic, the code for constructing declaration references was updated to pass along a source location to be used in error messages.
|
|
This appears to have been an oversight in the work that added support for `imageStore` as well as atomics when writing to `RWTexture*` and friends. The HLSL/Slang `RWBuffer` type maps to GLSL as an `imageBuffer`, which is effectively just another case of writable texture image (bonus points to anybody who can explain to me the meaningful distinction between an `imageBuffer` and an `image1D`).
This change copies the handling of subscript access (`operator[]`) from textures over to buffers, and adds a test case to confirm that the new handling works for the simple case of setting a buffer element.
|
|
* WIP with vector float test.
* vector-float test working.
* Fixed remaing tests broken with init changes.
* Improve 64bit-type-support.md
* Disable tests broken on CI system for Dx.
* WIP: Make type available for comparison.
* Moved type conversion into TypeTextUtil.
* Add text/type conversions from DownstreamCompiler to TypeTextUtil.
* Allow compaison taking into account type.
* Removed quantize in vector-float.slang test.
|
