| Age | Commit message (Collapse) | Author |
|---|
|
getSpecailizedMangledName to work properly.
|
|
The basic change is simple: remove support for all code generation paths other than the IR.
There is a lot of vestigial code left, but the main logic in `ast-legalize.*` is gone.
Doing this breaks a *lot* of tests, for various reasons:
- We can no longer guarantee exactly matching DXBC or SPIR-V output after things pass through out IR
- Many builtins don't have matching versions defined for GLSL output via IR (even when they had versions defined via the earlier approach that worked with the AST)
- A lot of code creates intermediate values of opaque types in the IR, which turn into opaque-type temporaries that aren't allowed (this breaks many GLSL tests, but also some HLSL)
I implemented some small fixes for issues that I could get working in the time I had, but most of the above are larger than made sense to fix in this commit.
For now I'm disabling the tests that cause problems, but we will need to make a concerted effort to get things working on this new substrate if we are going to make good on our goals.
|
|
* Remove support for the -no-checking flag
Fixes #381
Fixes #383
Work on #382
- No longer expose flag through API (`SLANG_COMPILE_FLAG_NO_CHECKING`) and command-line (`-no-checking`) options
- Remove all logic in `check.cpp` that was withholding diagnostics (including errors) when the no-checking mode was enabled
- Remove `HiddenImplicitCastExpr`, which was only created to support no-checking mode (it represented an implicit cast that our checking through was needed, but couldn't emit because it might be wrong)
- Remove logic for storing function bodies as raw token lists when checking is turned off. I'm leaving in the `UnparsedStmt` AST node in case we ever need/want to lazily parse and check function bodies down the line.
- Remove a few of the code-generation paths we had to contend with, but keep the comment about them in place.
- Remove GLSL-based tests that can't meaningfully work with the new approach.
- Fix other tests that used a GLSL baseline so that their GLSL compiles with `-pass-through glslang` instead of invoking `slang` with the `-no-checking` flag.
- Remove tests that were explicitly added to test the "rewriter + IR" path, since that is no longer supported.
There is more cleanup that can be done here, now that we know that AST-based rewrite and IR will never co-exist, but it is probably easier to deal with that as part of removing the AST-based rewrite path.
We've lost some test coverage here, but actually not too much if we consider that we are dropping GLSL input anyway.
* Fixup: test runner was mis-counting ignored tests
* Fixup: turn on dumping on test failure under Travis
* Fixup: enable extensions in Linux build of glslang
|
|
* Basic fixes to gets some Vulkan GLSL out of the IR path
We haven't been paying much attention to the Vulkan output from the IR path, but that needs to change ASAP. This commit really just implements quick fixes, without concern for whether they are a good fit in the long term.
- Add some more mappings from D3D `SV_*` semantics to built-in GLSL variables, and stop redeclaring those built-in variables in our output GLSL.
- Add custom output logic for HLSL `*StructuredBuffer<T>` types, so that they emit as `buffer` declarations with an unsized array inside. This has some real limitations:
- What if the user passes the type into a function? The parameter should be typed as an (unsized) array, and not a buffer.
- What happens if we have an array of structured buffers? We need to declare an array of blocks (which GLSL allows), but this changes the GLSL we should emit when indexing.
- Customize the way that we emit entry point attributes (e.g., `[numthread(...)]`) to also support outputting equivalent GLSL `layout` qualifiers.
In many of these cases, a better fix might involve doing more of this work in the IR as part of legalization (e.g., we already have a pass that deals with varying input/output for GLSL, so that should probalby be responsible for swapping the `SV_*` to `gl_*`, especially in cases where the types don't match perfectly across langauges).
* Start adding Vulkan support to render-test
- Add both Vulkan and D3D12 as nominally supported back-ends
- Add a git submodule to pull in the Vulkan SDK dependencies
- I don't want our users to have to install it manually, since the SDK is huge
- Checking in the binaries to our main repository seems like a bad idea, but my hope is that we can prune the bloat using a subodule with the `shallow` cloning option
- Implement enough logic for the Vulkan back-end to get a single test passing on Vulkan
* Fix warning
* Fixup: disable new compute tests for Linux
* Fixup: ignore Vulkan tests on AppVeyor
* Dynamically load Vulkan implementation
Rather than statically link to the Vulkan library, we will dynamically load all of the required functions.
This removes the need to have the stub libs involved at all.
* Remove vulkan submodule
I had set up a `vulkan` submodule to pull in the headers and stub libs, but now that we are going to dynamically load all the symbols anyway, the stub lib binaries aren't needed and we can just commit the headers.
* Add Vulkan headers to external/
|
|
* Fix render-test to handle raw buffers
I don't know if this fix will work for UAVs that are neither structured nor raw, but it fixes the code that currently only really works if every UAV is structured (since it doesn't set a format).
* Make type legalization consider raw buffer types
The type layout logic was already handling these, but the type splitting logic in legalization was failing to split structure types that contain, e.g., `RWByteAddressBuffer`.
A compute test case has been added to confirm the fix.
|
|
1. allow spReflection_FindTypeByName to accept arbitrary type expression string
2. allow const int generic value to be used as expression value, and as array size
3. various bug fixes in witness table specialization / function cloning during specializeIRForEntryPoint to avoid creating duplicate global values, not copying the right definition of a function from the other module, not cloning witness tables that are required by specializeGenerics etc.
|
|
|
|
fixes #362
|
|
|
|
* fix #353
* move validateEntryPoint to after all entrypoints has been checked
* bug fix: DeclRefType::SubstituteImpl should change ioDiff
* bug fix: generic resource usage should have count of 1 instead of 0.
* update test case
|
|
* no-codegen compile flag and global generics reflection
1. Add SLANG_COMPILE_FLAG_NO_CODEGEN (-no-codegen) compiler flag to skip code generation stage, so that a shader that uses global generic type parmameters can be parsed, checked and introspected without knowing the final specialization.
2. Add reflection API to query for global generic type parameters, global parameters of generic type, and the generic type parameter index related to a global generic parameter.
3. Add a reflection test case for global generic type parameters.
* add expected result for global-type-params test case.
* fix reflection json output.
* fix branch condition errors
* fix expected result for global-type-params.slang
* fix expected test case output
|
|
* More fixups for parameter block binding generation
The bug in this case arises when there is both a parameter block and global-scope resources, all of which are relying on automatic binding assignment. If the parameter block is the first global-scope parameter that gets encountered, then it is possible for it to allocate regsiter space/set zero for itself, which confuses the logic for handling other global-scope parameters (which assumes that *they* get space/set zero).
I've also made some fixup to the reflection test harness and reflection API code:
- Have the hardness handle register-space allocations when printing, and be sure to only show their `index` and not their `space` (since that would be redundant)
- Have the reflection API only auto-redirect queries on a parameter group type layout to its container type layout *if* the container type layout has a non-zero number of resource allocations. The problem that arises here is a `ParameterBlock<X>` where `X` doesn't contain any uniforms, so that no container is needed. In that case the container ends up with no resource allocation(s).
* Fixups for test failures.
- The thread-group size tests failed because they had shader parameters with no resources to back them (built-in `SV_` inputs), and the printing of those changed. I fixed up the baseline, but also had to fix a few bugs in the reflection test fixture's printing logic.
- The GLSL parameter block test revealed a corner case of the existing logic: because we always need to generate a binding for the "hack" sampler (even if code doesn't end up needing it), and that sampler should always go in the "default" set (should be set zero), the user's `ParameterBlock` will always end up as `set=1` or later, even if there are no other global-scope parameters.
- This will be fixed once we don't have to rely on glslang's annoying behavior in this one case, either because glslang gets fixed, or because we implement our own SPIR-V codegen.
|
|
* Cleanups to `ParameterBlock<T>` behavior.
These add some more realistic tests using the `ParameterBlock<T>` support, and show that it can work with the "rewriter" mode.
Unfortunately, this code does *not* currently work with the rewriter + the IR at once. That will need to be fixed in a follow-on change, because I now see that the root problem is pretty ugly.
* cleanup
|
|
Fixes #301
The problem here is that if you have input GLSL code like:
```glsl
// example.vs
in vec3 pos;
```
and:
```glsl
// example.fs
in vec3 worldPos;
```
Then both `pos` and `worldPos` are reflected as global variables (parameters of the *program*), which both get bound to "varying input" resources, but there is no way to tell through the API that `pos` is a vertex parameter while `worldPos` is a fragment one.
The original request in issue #301 was to expose parameters like this not as a global variables, but rather as parameters of the entry point in their specific file. That is, treat it as if the user had written, e.g.:
```glsl
// example.vs
void vsMain(in vec3 pos) { ... }
```
Doing that would unify the GLSL and HLSL/Slang cases a bit, but would require the Slang reflection API to lie about the structure of code the user wrote. At a more basic level, that would have been hard to implement because the current reflection API just exposes the underlying AST, and the AST *needs* to leave `pos` at the global scope so that when we go and spit GLSL back out we retain the original structure.
This PR implements a more simplistic solution, where the user is allowed to query the stage that a varying parameter "belongs" to. For right now I'm only enabling this to work for varying parameters (but it doesn't care if they are entry-point or global-scope varyings). Despite what I said on #301, this should work for both the top-level parameter's variable layout, *and* any variable layouts for fields within its type reflection.
In terms of implementation, I took the simple but wasteful route: every `VarLayout` now has a `stage` field that is by default initialized to `SLANG_STAGE_NONE`. When collecting varying parameters, I take advantage of the fact that everything bottlenecks through `processEntryPointParameter()` which takes an `EntryPointParameterState` so that I can set the `VarLayout::stage` field for any varying parameter in one place.
While I was making this change, I also did a bit of cleanup so that the "official" names for the varying parameter categories are `VARYING_INPUT` and `VARYING_OUTPUT`, with `VERTEX_INPUT` and `FRAGMENT_OUTPUT` being "deprecated" in principle. I didn't do the bulk rename inside the codebase yet.
|
|
The big picture here is that the AST-to-AST pass in `ast-legalize` will now detect when a declaration being referenced comes from an `import`ed module, and (if IR codegen is enabled), it will trigger cloning of the IR for the chosen symbol into an IR module that will sit alongside the legalized AST.
Then, during HLSL/GLSL code emit, we emit all the IR-based code first, and then the AST-based code. Whenever the AST code references a symbol that was lowered via IR (we keep track of these) we emit the mangled name of the IR symbol.
Notes/details:
- A lot of the logic for cloning IR symbols referenced by the AST matches the same logic that would clone them for completely IR-based codegen, so I tried to hoist out the common logic and share it (e.g., so that we apply the same guaranteed transformations in both cases). This required basically rewriting the logic in `emit.cpp` that decomposed the various cases.
- There is a new compute test case added to test this functionality. `tests/compute/rewriter.hlsl` confirms that we can use the `-no-checking` mode for the HLSL code, but still make use of a library of Slang code that employs generics, etc.
- Adding this test case required adding a new compute test mode that invokes `render-test` with the `-hlsl-rewrite` flag.
- It turns out that the existing `tests/render/cross-compile0.hlsl` test should have been using this functionality already. It was opting into the use of the IR via `-use-ir`, and the `render-test` application already tries to set `-no-checking` for non-Slang input languages by default. Fixing the code path this test triggers means that it is now a second test of rewriter+IR codegen.
- The `translateDeclRef` logic in `ast-legalize.cpp` seemed sloppy in places, and would potentially clone declarations, when declaration references were desired. I tried to clean a bit of this up, so some call sites are now changed.
- This change tries to clean up some work around cloning of global values
- All global value kinds (not just functions) now go through the logic of trying to pick a "best" definition, so that they can be used when we are linking multiple modules
- The logic for registering cloned values has been unified a bit, so that clients always pass in an `IROriginalValuesForClone` that either wraps a single value (maybe just null), or an `IRSpecSymbol*` that gives a list of values to regsiter the new value as a clone for.
- I made one piece of code that was cloning witness tables as part of generic specializations *not* register a clone. I think this is correct because we may specialize the same generic multiple ways, so registering any values we clone is not the right idea, but I might be missing something...
- I also reorganized this logic so that it would be easier to clone a global value when we only know its mangled name (which is the case when it is the AST that triggers cloning)
- I made sure that when loading a module via `import`, the translation unit for the new module copies the `-use-ir` flag from the overall compile request, if it is present (otherwise we wouldn't generate IR for loaded modules at all... oops).
- Note that `getSpecializedGlobalValueForDeclRef()`, which is the main routine used by the AST legalization to trigger cloning of an IR value does *not* currently handle declaration references that require specialization.
- This change does *not* deal with trying to unify the type legalization logic between the AST-to-AST rewriter and the IR-based codegen, so if you call an imported function with types that require legalization, Bad Things are expected to happen right now.
|
|
|
|
1. simplify RoundUpToAlignment()
2. add new a render-compute test case to cover the situation where the entry-point interface (parameter/return types of an entry-point function) is dependent on the global generic type.
3. initial fixes to get this test case to compile (but is not producing correct HLSL output yet)
|
|
* Add support for global generic parameters
(In-progress work)
This commit include:
1. Update Slang API to allow specification of generic type arguments in an `EntryPointRequest`
2. Add parsing of `__generic_param` construct, which becomes a GlobalGenericParamDecl, contains members of `GenericTypeConstraintDecl`.
3. Semantics checking will check whether the provided type arguments conform to the interfaces as defined by the generic parameter, and store SubtypeWitness values in the EntryPointRequest, which will be used by `specializeIRForEntryPoint` when generating final IR.
4. Add a new type of substitution - `GlobalGenericParamSubstitution` for subsittuting references to `__generic_param` decls or to its member `GenericTypeConsraintDecl` with the actual type argument or witness tables.
5. Update `IRSpecContext` to apply `GlobalGenericParamSubstitution` when specializing the IR for an EntryPointRequest.
6. Update `render-test` to take additional `type` inputs, which specifies the type arguments to substitute into the global `__generic_param` types.
This commit does not include ProgramLayout specialization.
* IR: pass through `[unroll]` attribute (#284)
The initial lowering was adding an `IRLoopControlDecoration` to the instruction at the head of a loop, but this was getting dropped when the IR gets cloned for a particular entry point.
The fix was simply to add a case for loop-control decorations to `cloneDecoration`.
* fix warnings
* IR: support `CompileTimeForStmt` (#286)
This statement type is a bit of a hack, to support loops that *must* be unrolled.
The AST-to-AST pass handles them by cloning the AST for the loop body N times, and it was easy enough to do the same thing for the IR: emit the instructions for the body N times.
The only thing that requires a bit of care is that now we might see the same variable declarations multiple times, so we need to play it safe and overwrite existing entries in our map from declarations to their IR values.
Of course a better answer long-term would be to do the actual unrolling in the IR. This is especially true because we might some day want to support compile-time/must-unroll loops in functions, where the loop counter comes in as a parameter (but must still be compile-time-constant at every call site).
* Add support for global generic parameters
(In-progress work)
This commit include:
1. Update Slang API to allow specification of generic type arguments in an `EntryPointRequest`
2. Add parsing of `__generic_param` construct, which becomes a GlobalGenericParamDecl, contains members of `GenericTypeConstraintDecl`.
3. Semantics checking will check whether the provided type arguments conform to the interfaces as defined by the generic parameter, and store SubtypeWitness values in the EntryPointRequest, which will be used by `specializeIRForEntryPoint` when generating final IR.
4. Add a new type of substitution - `GlobalGenericParamSubstitution` for subsittuting references to `__generic_param` decls or to its member `GenericTypeConsraintDecl` with the actual type argument or witness tables.
5. Update `IRSpecContext` to apply `GlobalGenericParamSubstitution` when specializing the IR for an EntryPointRequest.
6. Update `render-test` to take additional `type` inputs, which specifies the type arguments to substitute into the global `__generic_param` types.
progress on parameter binding
* Add a more contrived test case for specializing parameter bindings
* update render-test to align buffers to 256 bytes (to get rid of D3D complains on minimal buffer size).
* adding one more test case for parameter binding specialization.
* Cleanup according to @tfoleyNV 's suggestions.
* fix a bug introduced in the cleanup
|
|
* Revise type legalization so it can handle constant buffers
The existing legalization approach with "tuples" can handle scalarizing a `struct` type with resource-type fields in it, but it had several big gaps. The most notable is that given a type that mixes uniform and resource fields, we can't just blindly scalarize things:
```
struct P {
float4 a;
float4 b;
Texture2D t;
};
cbuffer C
{
P gParam[8];
};
```
The existing code was completely ignoring the declaration of `gParam` inside `C`, but even if we fixed that issue, we'd get something like:
```
cbuffer C
{
float4 gParam_a[8];
float4 gParam_b[8];
};
Texture2D gParam_t[8];
```
In this case we've completely changed the layout of the uniform buffer, by switching from AOS to SOA.
Even if we could get the type layout logic and the IR to agree on this, it would be a surprise to users, and "principle of least surprise" should be a big deal on a project with as many moving parts as ours.
The right thing to do is to have legalization create a "stripped" version of the original type `P` and use that:
```
struct P_stripped {
float4 a;
float4 b;
};
cbuffer C
{
P_stripped gParam[8];
};
Texture2D gParam_t[8];
```
Then at a call site, this:
```
foo(gParam);
```
becomes:
```
foo(gParam, gParam_t);
```
This is exactly how the current AST-to-AST legalization handles mixed uniform and resource types, but the way it does it involves some annoying kludges:
- That pass has a notion of a "tuple" similar to our legalization, but every tuple has an optional "primary" entry for all the uniform data, plus tuple elements for the resources, and a given field may be represented on one side, the other, or both. It makes the code for handling tuples very messy.
- That pass does the "stripping" of types by actually marking up the AST declarations (this is okay because it is constructing a new AST as it goes), so that when they get emitted certain fields don't actually show up. That is, we fix the problem with type `P` by actually *modifying* the user's declaration of `P`. That seems out of bounds for the IR.
This change fixes the problem in our IR type legalization while trying to avoid the problems of the AST-to-AST pass by using two new ideas:
1. We add a new case for `LegalType` (and `LegalVal`) that is a "pair" type, where a pair consists of both an "ordinary" type (for uniform data) and a "special" type (for resource data). E.g., after legalization, the type for `C` (which can be over-simplified to `ConstantBuffer<P>` for our purposes), will be a `LegalType::pair` where the ordinary side is `ConstantBuffer<P_stripped>` and the special side is a tuple containing the `Texture2D` field.
2. We add a new (and annoyingly hacky) AST-level type called `FilteredTupleType` which is semantically a sort of tuple type (it holds a list of elements, and the elements have their own types), but which remembers an "original type" that it was created from, and for each element remembers the field of the original type that it corresponds to. This is used to construct a type like `P_stripped` as an actual AST-level structural type.
The core logic for legalizing an aggregate type had to get more complicated just because of the new pair case, so there is now a `TupleTypeBuilder` that asists with taking an aggregate type, processing its fields, and then picking the right `LegalType` representation for the result.
Other smaller changes:
- Made the legalization logic actually legalize `PtrType<T>`. E.g., if `T` legalizes to a tuple, we need to construct a tuple of pointer types. The same exact thing needs to be applied to arrays, and any other generic type that should "distribute over" pairs/tuples.
- Made the legalization logic actually legalize `ConstantBuffer<T>` and similar. The basic idea there is if `T` maps to a pair, we wrap `ConstantBuffer<...>` around the ordinary side, and `implicitDeref` around the special side.
- Removed a bunch of `#ifdef`ed-out code from the end of `ir-legalize-types.cpp`. That was code from my first attempt at legalization that failed miserably (trying to do it via local changes and a work list instead of a global rewrite pass), but it had some code I wanted to reference when writing the version that actually got checked in (should have deleted the code earlier, though).
- Added a bunch of cases for `LegalType::none` (and the `LegalVal` equivalent) that helped simplify the logic fo the `pair` case by allowing me to *always* dispatch to both the "ordinary" and "special" sides, even if they might not actually be present.
- Renamed `TupleType` and `TupleVal` over to `TuplePseudoType` and `TuplePseudoval` to recognize the fact that we might actually need/want *real* tuples in the type system, to go along with these fake ones (that need to be optimized away).
The biggest doubt I have about this change is the whole `FilteredTupleType` thing; it seems like an obviously contrived type to add to the front-end type system that really only solves IR-level problems. A cleaner approach might have been to just add a plain old `TupleType` to the front-end type system (and initially I started with that), and then have yet another `LegalType`/`LegalVal` case that handles mapping from the fields of the original type to the numbered tuple elements.
I expect we'll actually want to make that change in the future (especially if we ever add true tuples to the front-end), but for right now I let myself be swayed by the desire to have these stripped/filtered types get names that explain their provenance ("where they came from") to make our output code more debuggable. The way I've done it is probably overkill, though, and we need a much more complete effort on the readability and debuggability of our output before anything like that is worth worrying about.
* Fixup: typo
* Fixup: fix output of "non-mangled" names for test cases
- Make sure to attach high-level decls to variables created as part of type legalization
- Also, try to share more of the code between the different cases of variables
- Fix up `parameter-blocks` test case that was passing `-no-mangle` but expecting mangled names in the output
- Fix up `multiple-parameter-blocks` to not rely on `-no-mangle` for now, because it would lead to two global variables with the same name (need to fix that underlying issue eventually).
- Also fix name generation logic so that we only use "original" names (from high-level decls) specifically when the `-no-mangle` flag is on, and otherwise use IR-level names.
* Fix: handle constant buffers better in render-test
- Don't request both CB and SRV usage for buffers, since that is illegal
- Also, don't try to create an SRV when user requested a CB (since the required usage flag won't be there)
- Record the input buffer type on the `D3DBinding` for a buffer, and use that to tell us when to bind a CB instead of SRV/UAV
- Fix expected output for `cbuffer-legalize` test now that we are actually feeding it correct cbuffer dta.
|
|
* Don't auto-enable IR use for compute tests
The `COMPARE_COMPUTE` and `COMPARE_RENDER_COMPUTE` test fixtures were set up to always enable the `-use-ir` flag on Slang, which precludes having any tests that confirm functionality on the old non-IR path (which is still required by our main customer).
This change adds the `-xslang -use-ir` flags explicitly to any compute test cases that left them out, and makes the fixture no longer add it by default.
* Continue building out parameter block support
The initial front-end logic for parameter blocks was already added, but they are still missing a bunch of functionality. This change addresses some of the known issues:
- Bug fix: don't try to emit HLSL `register` bindings for variables that consume whole register spaces/sets
- Overhaul type layout logic so that it can make decisions based on a given code generation target (currently passed in as a `TargetRequest`), which allows us to decide whether or not a parameter block should get its own register set on a per-target basis.
- Always use a register space/set for Vulkan
- Never use a register space/set for HLSL SM 5.0 and lower
- By default, don't use register spaces/sets for HLSL output
- Add a command-line flag and some "target flags" to enable register-space usage for D3D targets
- Hackily add initial support for parameter blocks in the AST-to-AST path
- This just blindly lowers `ParameterBlock<T>` to `T`, which shouldn't quite work
- A more complete overhaul will probably need to wait until the AST-to-AST legalization is changed to use the `LegalType`s from the IR legalization pass.
- Add a compute-based test case to actually run code using parameter blocks
- This file runs test cases both with and without the IR
|
|
This changes logic of slang-generate to detect whether the newly generated .h file is different from the existing file, and update the existing file only when the actual content has changed. This helps prevent visual studio from repetitively rebuilding the slang project due to the header file being updated on every build.
|
|
|
|
This is currently only useful for `struct` types.
I implemented a special-case exception so that the auto-generated `struct` types used for `cbuffer` members don't show their internal name.
I did *not* implement any logic to avoid returning the name `vector` for a vector type, etc., since they are all `DeclRefType`s and it seemed easiest to just let the user access information they can't really use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Fix up test runner output for compute.
We want compute-based tests to produce a `.actual` file when compilation fails, so we can easily diagnose the issue. I thought I'd added this capability previous, but it seemst to not be present any more.
* Compute result types for constructor decls
Fixes #246
When the parser sees an `init()` declaration, it can't easily know what type is is supposed to return, so it leaves the type as NULL. This was causing some downstream crashes.
Rather than special-case every site that cares about the result type of a callable, we will instead ensure that we install an actual result type on an initializer/constructor as part of its semantic checking.
This code needs to handle both the case where the initializer is declared inside a type, as well as the case where it is declared inside an `extension`.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
vertex/fragment shader pair, but instead of comparing the resulting framebuffer, it expects the test shader to write results into a UAV, and compares the pixel shader UAV output to the reference output.
|
|
|
|
|
|
|
|
|
|
|
