| Age | Commit message (Collapse) | Author |
|
* Various Fixes to gfx, reflection and emit.
- Fix GLSL emit to properly output `*bitsTo*` functions for `IRBitCast` insts.
- Add line directive mode setting for `ISession`.
- Extend `TypeLayout::getElementStride` to handle `VectorType` case.
- Fix `IDevice::readBufferResource` 's D3D12 implementation to copy only the requested bytes out.
- Fix `render-test` to use the `ISession` from `gfx` instead of creating its own `ISession` to make sure `gfx` and `render-test` agree on WitnessTable and RTTI IDs.
- Extend `render-test` to support filling vector and matrix values in the new `set x = ...` TEST_INPUT syntax.
- Add a `dynamic-dispatch-15` test case to make sure packing / unpacking works correctly across all targets, and to make sure render-test's RTTI/WitnessTable ID filling logic is correct for non-trivial cases.
* Remove default-major test
* Fix cyclic reference in `ExtendedTypeLayout`.
* Move `lineDirectiveMode` setting to `TargetDesc`.
Add `structureSize` to `TargetDesc` and `SessionDesc` for future binary compatibility.
* Cleanup.
Co-authored-by: Yong He <yhe@nvidia.com>
|
|
|
|
* #include an absolute path didn't work - because paths were taken to always be relative.
* Split out AST 'printing'.
* Replace listener with List<Section>
* Section -> Part.
* Kind -> Type Flags -> Kind for ASTPrinter::Part
* Improve comments around ASTPrinter.
* toString -> toText on Val derived types. toText appends to a StringBuilder.
* Added toSlice free function.
Added operator<< for Val derived types.
Use << where appropriate in doing toText.
* More work at mark down output.
* Fill in sourceloc for enum case.
Add more sophisticated location determination for EnumCase.
Refactored documentation output into DocMarkdownWriter.
* Improvements for sig output.
* Split up slang-doc into extractor and writer.
* WIP generic support for doc support.
* Some refactoring to make DocExtractor have potential to be used without Decls.
* Made doc extraction work without Decls.
* Output generic parameters.
* Add generic parameter extraction.
* Added writing variables.
* Add an interface test.
* Fix toArray.
* Support for extensions, and inheritance.
* Disable the doc test.
* Added flags to compileStdLib.
* More work around handling generics in markdown output.
* More improvements around associated type handling.
* List method names only once.
Output in/out/inout/const
* Fix namespace printing.
* WIP summarizing doc output.
* Small fixes and improvements for doc output.
* Output all stdlib in single doc file.
* Remove compile flags from addBuiltinSource.
* Find only unique signatures.
First pass at trying to get requirements.
* First pass at requirements for stdlib docs.
* Remove __ function/methods
* Added Target Availability
* Add markup access.
Make sections of stdlib hidden.
* MarkdownAccess -> Visibility
Add isVisible methods
Use ASTPrinter to print decl name.
* Add current stdlib doc output.
* Disable doc test for now.
* Fix clang issue.
* Don't use bullets and numbering , just use numbering.
* Put methods in source order.
* Fix bad-operator-call.slang test that fails because it now outputs out parameters as such.
* Refactor MarkDownWriter to separate 'extraction' from output.
* Fix typo around @ lines.
* Fix issue with extracting 'before' when preceeded by complex attributes/modifiers.
* Fix handling of generics with the same name.
* Work around for having overloading with generics - we don't want to output generic params as part of name.
* Remove generic paramters from name.
* Simplify handling of outputting overridable names.
|
|
* Cache stdlib when creating global session.
* Fix
* Fix
|
|
|
|
* Fill in some missing bits of capability API
* Make invalid/unknown capability have a zero value (this aligns it better with the public API for `SlangProfileID`, so that the two can be merged down the line)
* Actually provide an implementation of `spFindCapability()` public API
* fixup: bug fixes for renumbering invalid capability atom
|
|
* Use "capability" system to select VKRT extension
Slang currently supports translation of ray tracing shader code to Vulkan GLSL code that uses the `GL_NV_ray_tracing` extension. A multi-vendor equivalent of that extension has been released as `GL_EXT_ray_tracing` and we want Slang to support that extension as well.
At the simplest, making the change from one extension to the other is just a matter of changing a few strings, since it does not appear that anything of significance was changed at the GLSL level (or even in SPIR-V). Where this gets trickier is when we have users who want us to support *both* extensions, and to be able to switch between them.
The solution we've implemented here more or less amounts to:
* If you don't tell the compiler which extension to use, it will default to `GL_EXT_ray_tracing` (the newer multi-vendor one).
* If you explicitly want the older extension, you can opt into it using the `-profile` option or via a new API for explicitly adding capabilities to your target.
Making that work required a few different kinds of changes:
* The options parsing and public API needed ways to add optional capabilities to a target.
* During GLSL code emit, we can check the capabilities that were added to the target to see if the `GL_NV_ray_tracing` extension was explicitly enabled and, if not, default to using the `GL_EXT_ray_tracing` names for things. This step is needed because some of the modifiers/attributes involved in the extension have to be handled explicitly in the code generator rather than implicitly as part of mapping intrinsic functions.
* We add two different translations to the relevant operatiosn in the stdlib, one marked with each of the extensions. If profile/capability-based overload resolution can be relied on to pick the right one, this should Just Work.
* Next, a bunch of work had to go into making capability-based overloading Just Work for the purposes of this change. There's been a nearly complete reworking of the implementation of `CapabilitySet` here to make it more suitable for our needs.
* The tests that were using ray tracing translation for Vulkan needed to be updated. For some of them I updated their baselines to use `GL_EXT_ray_tracing` so that they can test the new path. For others, I updated the command line for the test case so that it explicitly opts into using `GL_NV_ray_tracing`. The result is that we have some coverage of each extension. I would have liked to have each test run in both modes, but our pass-through glslang support doesn't support `-D` options, so I couldn't take that step easily.
This change does *not* add support for `GL_EXT_ray_query`, the extension that supports "DXR 1.1" style queries under Vulkan. Adding support for that extension should hopefully be a smaller step because it doesn't have the same multiple-extensions issue.
This change does *not* address a lot of possible avenues for improvement or cleanup around the capability system. It focuses only on those changes that are necessary to make the ray tracing feature work and leaves the rest for future work.
* fixup: infinite loop
* Comment-only change to retrigger TC build
|
|
* #include an absolute path didn't work - because paths were taken to always be relative.
* Move reflection to reflection-api.
* Slight reorg to pull out potentially Slang internal functions from the reflection API impls.
* Remove visual studio projects
* Fix for slang-binaries copy.
* Add the visual studio projects in build/visual-studio
* Remove miniz project.
* Differentiate the linePath from the filePath.
* Improve comment in premake5.lua + to kick of CI.
* Kick CI.
* Use COM compile request for calls to functions inside api-less-slang.
Add static-slang project.
* Fix const typo issue.
* Don't include 'core' link in 'api-less-slang'
* Removed static-slang lib causes problems on linux with linking.
Embed Slang stdlib
Added StaticBlob
Added dumpSourceBytes
Use ConstArrayView for the archive.
At startup allow loading of zip with stdlib.
Made -save-stdlib -load-stdlib take a name
Added '-save-stdlib-bin-source' to save out serialized stdlib as source.
* Ability enable/disable stdlib embedding.
* Fix problem with moduleDecl not having module pointer set when serialized in.
* Set of debugdir for slang-test and examples.
* Add slang-stdlib-api.cpp
* Update slang filters for VS.
* Try to use pic, and -mcmodel=medium
* Some more efforts ot make premake work.
* WIP premake5.lua from previously working version.
* Remove api-less-slang project.
* Disable dllexport on gcc/clang.
* Embed via slangc-bootstrap.
* Fix slang-profile. Always compiles without stdlib.
* Use pic "On"
* Remove slangc-bootstrap and embed-stdlib-generator if embedding not required. Make bootstrap run the generators.
* Improve comments in premake5.lua.
Kick off another CI build.
* Remove generation of stdlib source from std-lib-serialize.slang
|
|
* #include an absolute path didn't work - because paths were taken to always be relative.
* Move reflection to reflection-api.
* Slight reorg to pull out potentially Slang internal functions from the reflection API impls.
* Remove visual studio projects
* Fix for slang-binaries copy.
* Add the visual studio projects in build/visual-studio
* Remove miniz project.
* Differentiate the linePath from the filePath.
* Improve comment in premake5.lua + to kick of CI.
* Kick CI.
|