| Age | Commit message (Collapse) | Author |
|---|
|
Fixes #307
This ends up being a major overhaul over how type layout computation is structured and exposed.
The big problems all arise around cases where both the "container" for a parameter block or CB, and the "element" type both use the same kind of resource.
E.g., if you define a CB with a texture in it, then in Vulkan both the CB and the texture use the same kind of resource, and so if you query the CB's resource usage it will just tell you it uses two descriptor-table slots, but nothing more than that.
Similar confusion still arises in the HLSL case, when a CB with a texture in it reports its parameter category as "mixed" so that a user might query for a category they didn't mean to. There were also cases in the existing code where a parameter block might expose *both* a register-space usage and another concrete resource type, which isn't right.
The most important changes here are:
- A `ParameterGroupTypeLayout` now has a more refined internal structure, consisting of:
- A `containerTypeLayout`, which represents the resource usage of the buffer/block itself (e.g., if a constant buffer had to be allocated)
- An `elementVarLayout` which stores the offsets that need to be applied to get from the `VarLayout` for an instance of this parameter-group type to the offsets of its elements. The `TypeLayout` for this variable layout should be the "raw" type of the block/CB element.
- The `offsetElementTypeLayout` (formerly just `elementTypeLayout`) which represents the element type, but in the case of a `struct` element type, will have fields offset similar to the `elementVarLayout`. This is what all the old code used to use, so we need to keep it for compatibility.
- When doing reflection on a `ParameterGroupTypeLayout`, we now only report the resource usage of the `containerTypeLayout`. This is technically a potentially breaking change in the public API, but I don't think Falcor will mind, since they actually want something closer to this behavior.
- Add a new public API for querying the element variable layout of a parameter block of constant buffer. This could be used by savvy applications to fold the handling of CB element offsetting into some notion of a "reflection path." This would be required for applications that want to handle CBs or parameter blocks where the element type is *not* a `struct` type.
- Remove old logic for applying an offset when creating a type layout for constant buffer element, and instead perform offsetting more uniformly later, by constructing the `offsetElementTypeLayout` from the `rawElementTypeLayout`. This is useful both because we want to keep both (the "raw" type layout becomes the type layout of the `elementVarLayout`), and also because we can decide later whether we even want to allocate a CB register for a buffer, based on whether it actually contains any uniform data.
- Fix cases where we might end up with a parameter block type reporting both that it uses a whole register space (and thus should not expose the resource usage of the container/element type) *and* a constant-buffer register/slot. The latter should be hidden inside the regsiter space.
- Clean up the `spReflectionParameter_GetBinding{Index,Space}` functions to just route to `spReflectionVariableLayout_Get{Offset,Space}`, using the "default" category of the parameter
- Try to make the `GetSpace` query take into account cases where a variable also has an explicit `RegisterSpace` allocation.
- This probably still needs some cleanup, since ideally we'd just move things into the `space` field on the `ReosurceInfo` and have an invariant that a variable *either* has a `RegisterSpace` allocation, or it has other resource infos, but never both...
- Add some ad-hoc logic so that if the user queries for a binding index/space using a parameter category that doesn't actually apply (e.g., they query for a D3D `t` register when using Vulkan), we can optionally remap it to the resource type they "probably" meant. This is a mess of Do What I Mean code, but it is also what our users want right now.
- Fix various bits of emit logic so that if a parameter block has a register space/set allocated to it, we properly output that as part of the binding information for it.
- This is another thing that might be cleaned up if we rationale the way that things get split during legalization.
- Add a GLSL case for emitting a parameter block variable as a `cbuffer`.
|
|
* Cleanups to `ParameterBlock<T>` behavior.
These add some more realistic tests using the `ParameterBlock<T>` support, and show that it can work with the "rewriter" mode.
Unfortunately, this code does *not* currently work with the rewriter + the IR at once. That will need to be fixed in a follow-on change, because I now see that the root problem is pretty ugly.
* cleanup
|
|
* Make AST and IR share type legalization code
A previous change already made it so that the AST-to-AST lowering/legalization pass could work together with IR-based lowering of `import`ed code, but that change didn't take into account the case where a function written in the AST needed to call an IR function and pass in a type that required legalization.
Both the IR-based and AST-based passes had their own approaches to type legalization, that mostly agreed on the desired output, but they ended up creating their own representations for legalized types which would mean that for a function call the caller and callee might end up legalizing the parameter list to use different types.
This change tries to fix this issue (and adds a new test case that relies on the fix) by massively overhauling the AST-based legalization pass so that it uses the same type legalization code as the IR. The shared code has been moved out into `legalize-types.{h,cpp}`.
Notes:
- I eliminated the `FilteredTupleType` type, since it was starting to cause code duplication in a lot of places. Instead, type legalization just creates new `struct` types to represent the result of filtering.
- One big consequence of this is that the `LegalType::pair` case needs to remember for each field in the original type which field (if any) in the new `struct` type it maps to
- A big source of complexity (and probably bugs) in this code is trying to figure out how to parent these new `struct` definitions effectively. A good follow-on change would be something that outputs declarations on-demand during the AST emit logic (as we do for the IR), just to avoid some of this song and dance.
- The old AST type legalization had a notion of both a "tuple" type and a "varying tuple" type. The "tuple" case was quite complex, and combined behavior currently handled by `LegalType::pair` (for splitting into ordinary and special sides) and `LegalType::tuple` (for holding multiple distinct elements to represent the fields of an aggregate). The "varying tuple" case was closer to `LegalType::tuple`, so I tried to just re-use the existing logic for that too. The one place this potentially gets messy is in `reifyTuple()`.
- The messiest bit of handling the "varying tuple" concept (which is used for GLSL shader inputs/outputs since they have to be scalarized) is that when passing them as function arguments we need to reify the tuple back into a structured value. Because the `LegalExpr` hierarchy doesn't have type information, but constructing a value of the "original" type requires such information, things get a little messy.
- I did *not* try to deal with any of the logic related to handling system inputs/outputs for cross-compilation purposes. Of course, the long-term goal is that any actual cross-compilation is handled via the IR, but this change can't afford to break the AST-based path just yet. As a result, there is still quite a bit of complexity in the handling of assignment, to deal with cases where "fixups" are required.
* fixup: bad code in macro, not caught by Visual Studio compiler
* fixup: more stuff missed by VS compiler
* fixup: VS continutes to miss stuff in UNREACHABLE_RETURN
|
|
The big picture here is that the AST-to-AST pass in `ast-legalize` will now detect when a declaration being referenced comes from an `import`ed module, and (if IR codegen is enabled), it will trigger cloning of the IR for the chosen symbol into an IR module that will sit alongside the legalized AST.
Then, during HLSL/GLSL code emit, we emit all the IR-based code first, and then the AST-based code. Whenever the AST code references a symbol that was lowered via IR (we keep track of these) we emit the mangled name of the IR symbol.
Notes/details:
- A lot of the logic for cloning IR symbols referenced by the AST matches the same logic that would clone them for completely IR-based codegen, so I tried to hoist out the common logic and share it (e.g., so that we apply the same guaranteed transformations in both cases). This required basically rewriting the logic in `emit.cpp` that decomposed the various cases.
- There is a new compute test case added to test this functionality. `tests/compute/rewriter.hlsl` confirms that we can use the `-no-checking` mode for the HLSL code, but still make use of a library of Slang code that employs generics, etc.
- Adding this test case required adding a new compute test mode that invokes `render-test` with the `-hlsl-rewrite` flag.
- It turns out that the existing `tests/render/cross-compile0.hlsl` test should have been using this functionality already. It was opting into the use of the IR via `-use-ir`, and the `render-test` application already tries to set `-no-checking` for non-Slang input languages by default. Fixing the code path this test triggers means that it is now a second test of rewriter+IR codegen.
- The `translateDeclRef` logic in `ast-legalize.cpp` seemed sloppy in places, and would potentially clone declarations, when declaration references were desired. I tried to clean a bit of this up, so some call sites are now changed.
- This change tries to clean up some work around cloning of global values
- All global value kinds (not just functions) now go through the logic of trying to pick a "best" definition, so that they can be used when we are linking multiple modules
- The logic for registering cloned values has been unified a bit, so that clients always pass in an `IROriginalValuesForClone` that either wraps a single value (maybe just null), or an `IRSpecSymbol*` that gives a list of values to regsiter the new value as a clone for.
- I made one piece of code that was cloning witness tables as part of generic specializations *not* register a clone. I think this is correct because we may specialize the same generic multiple ways, so registering any values we clone is not the right idea, but I might be missing something...
- I also reorganized this logic so that it would be easier to clone a global value when we only know its mangled name (which is the case when it is the AST that triggers cloning)
- I made sure that when loading a module via `import`, the translation unit for the new module copies the `-use-ir` flag from the overall compile request, if it is present (otherwise we wouldn't generate IR for loaded modules at all... oops).
- Note that `getSpecializedGlobalValueForDeclRef()`, which is the main routine used by the AST legalization to trigger cloning of an IR value does *not* currently handle declaration references that require specialization.
- This change does *not* deal with trying to unify the type legalization logic between the AST-to-AST rewriter and the IR-based codegen, so if you call an imported function with types that require legalization, Bad Things are expected to happen right now.
|
|
* Rename `lower.{h,cpp}` to `ast-legalize.{h,cpp}`
This pass isn't really performing lowering akin to `lower-to-ir.{h,cpp}` so the file name is misleading.
By renaming this pass we emphasize its role as an AST-related pass.
Also update the comment at the top of `ast-legalize.h` to reflect the intended purpose of this pass in a world where we have the IR up and running.
* Allow `import` as an alias for `__import`
The use of double underscores to mark our new syntax has so far had two purposes:
1. It helps identify syntax that isn't meant to be exposed to users in its current form (e.g., `__generic` gets a double underscore because we want users to have a more pleasant surface syntax for generics that they write). This rationale doesn't apply to `__import`, which is a major language feature that users need to interact with.
2. It helps avoid the problem where the compiler treats something as a keyword that isn't supposed to be reserved in HLSL/GLSL and so causes existing user code to fail to parse (e.g., when the user tries to write a function called `import`). This no longer matters because we look up almost all of our keywords using the existing lexical scoping in the language (so the user can shadow almost any keyword with a local declaration).
So, neither of the original two reasons applies to `__import`, and it makes sense to expose it as `import`.
Doing so is a one-line change.
|
|
Fixes #295.
The code previously had a white list of attributes that it passed through, implemented in `emit.cpp` in an ad hoc fashion. The fix here is to just pass through whatever attributes the user wrote, and then let the downstream compiler diagnose if any of them are errorneous.
|
|
The big change here is that the ability to contain basic blocks with instructions in them has been hoisted from `IRFunc` into a new base type `IRGlobalValueWithCode` shared with `IRGlobalVar`.
The basic blocks of a global variable define initialization logic for it; they can be looked at like a function that returns the initial value.
Places in the IR that used to assume functions contain all the code need to be updated, but so far I only handled the cloning step.
The emit logic currently handles an initializer for a global variable by outputting its logic as a separate function, and then having the variable call that function to initialize itself. This should be cleaned up over time so that we generate an ordinary expression whenever possible.
I also made the emit logic correctly label any global variable without a layout (that is, any that don't represent a shader parameter) as `static` so that the downstream HLSL compiler sees them as variables rather than parameters.
|
|
These were already being handled a little bit, by lowering an `out T` or `inout T` function parameter in the AST to a function parameter with type `T*` in the IR, and then emiting explicit loads/stores.
The HLSL emit logic, however, couldn't tell the difference between an `out` parameter, an `inout`, or a true pointer (if we ever needed to support them...).
The intention (not fully implemented) was that we'd use a hierarchy of types rooted at `PtrTypeBase`:
- `PtrTypeBase`
- `Ptr`: "real" pointers in the C/C++ sense
- `OutTypeBase`: pointers used to represent by-reference parameter passing
- `OutType`: IR level type for an `out` parameter
- `InOutType`: IR level type for an `inout` or `in out` parameter
Actually implementing this involved:
- Adding a bit more flexibility to the `Session::getPtrType` logic to allow for creating any of the concrete types above
- Making the `lower-to-ir` logic create the right type for function parameters (instead of just using `PtrType`)
- Making the HLSL emit logic check for the `OutType` and `InOutType` cases rather than just `PtrType`
- Changing a bunch of small places in the code so that they use `PtrTypeBase` instead of `PtrType` when they should handle any of the above cases, and also make a few places check for `OutTypeBase` instead of `PtrType` or `PtrTypeBase`, when they are really trying to capture by-reference parameters
- Add a test case that uses all of the different cases we care about (without these fixes, this test case generates errors from fxc because of variables being used before being initialized, becaues parameters get declared `out` that should be `inout`).
A minor point here is that we are playing a bit fast and loose right now because the IR does not actually enforce any type checks. From the standpoint of the front end, `Ptr<T>`, `Out<T>`, and `InOut<T>` are all unrelated types (each is just a `struct` declared in `core.meta.slang`), but this doesn't really matter because none of these are types our current users are explicitly using.
In the IR it makes perfect sense to allow `Out<T>` or `InOut<T>` as the operand of a `load` or `store` instruction (and ditto for `getFieldAddr`, etc.) - there instructions just apply to any `PtrTypeBase`. The place where this potentially gets tricky is whether an `Out<T>` can be used where a `Ptr<T>` is expected, or vice vers (e.g., can I just pass my local variable's pointer directly to an `Out<T>` function parameter?
I'm going to ignore these issues for now, since the code currently works for our test case.
|
|
* Add support for global generic parameters
(In-progress work)
This commit include:
1. Update Slang API to allow specification of generic type arguments in an `EntryPointRequest`
2. Add parsing of `__generic_param` construct, which becomes a GlobalGenericParamDecl, contains members of `GenericTypeConstraintDecl`.
3. Semantics checking will check whether the provided type arguments conform to the interfaces as defined by the generic parameter, and store SubtypeWitness values in the EntryPointRequest, which will be used by `specializeIRForEntryPoint` when generating final IR.
4. Add a new type of substitution - `GlobalGenericParamSubstitution` for subsittuting references to `__generic_param` decls or to its member `GenericTypeConsraintDecl` with the actual type argument or witness tables.
5. Update `IRSpecContext` to apply `GlobalGenericParamSubstitution` when specializing the IR for an EntryPointRequest.
6. Update `render-test` to take additional `type` inputs, which specifies the type arguments to substitute into the global `__generic_param` types.
This commit does not include ProgramLayout specialization.
* IR: pass through `[unroll]` attribute (#284)
The initial lowering was adding an `IRLoopControlDecoration` to the instruction at the head of a loop, but this was getting dropped when the IR gets cloned for a particular entry point.
The fix was simply to add a case for loop-control decorations to `cloneDecoration`.
* fix warnings
* IR: support `CompileTimeForStmt` (#286)
This statement type is a bit of a hack, to support loops that *must* be unrolled.
The AST-to-AST pass handles them by cloning the AST for the loop body N times, and it was easy enough to do the same thing for the IR: emit the instructions for the body N times.
The only thing that requires a bit of care is that now we might see the same variable declarations multiple times, so we need to play it safe and overwrite existing entries in our map from declarations to their IR values.
Of course a better answer long-term would be to do the actual unrolling in the IR. This is especially true because we might some day want to support compile-time/must-unroll loops in functions, where the loop counter comes in as a parameter (but must still be compile-time-constant at every call site).
* Add support for global generic parameters
(In-progress work)
This commit include:
1. Update Slang API to allow specification of generic type arguments in an `EntryPointRequest`
2. Add parsing of `__generic_param` construct, which becomes a GlobalGenericParamDecl, contains members of `GenericTypeConstraintDecl`.
3. Semantics checking will check whether the provided type arguments conform to the interfaces as defined by the generic parameter, and store SubtypeWitness values in the EntryPointRequest, which will be used by `specializeIRForEntryPoint` when generating final IR.
4. Add a new type of substitution - `GlobalGenericParamSubstitution` for subsittuting references to `__generic_param` decls or to its member `GenericTypeConsraintDecl` with the actual type argument or witness tables.
5. Update `IRSpecContext` to apply `GlobalGenericParamSubstitution` when specializing the IR for an EntryPointRequest.
6. Update `render-test` to take additional `type` inputs, which specifies the type arguments to substitute into the global `__generic_param` types.
progress on parameter binding
* Add a more contrived test case for specializing parameter bindings
* update render-test to align buffers to 256 bytes (to get rid of D3D complains on minimal buffer size).
* adding one more test case for parameter binding specialization.
* Cleanup according to @tfoleyNV 's suggestions.
* fix a bug introduced in the cleanup
|
|
* Revise type legalization so it can handle constant buffers
The existing legalization approach with "tuples" can handle scalarizing a `struct` type with resource-type fields in it, but it had several big gaps. The most notable is that given a type that mixes uniform and resource fields, we can't just blindly scalarize things:
```
struct P {
float4 a;
float4 b;
Texture2D t;
};
cbuffer C
{
P gParam[8];
};
```
The existing code was completely ignoring the declaration of `gParam` inside `C`, but even if we fixed that issue, we'd get something like:
```
cbuffer C
{
float4 gParam_a[8];
float4 gParam_b[8];
};
Texture2D gParam_t[8];
```
In this case we've completely changed the layout of the uniform buffer, by switching from AOS to SOA.
Even if we could get the type layout logic and the IR to agree on this, it would be a surprise to users, and "principle of least surprise" should be a big deal on a project with as many moving parts as ours.
The right thing to do is to have legalization create a "stripped" version of the original type `P` and use that:
```
struct P_stripped {
float4 a;
float4 b;
};
cbuffer C
{
P_stripped gParam[8];
};
Texture2D gParam_t[8];
```
Then at a call site, this:
```
foo(gParam);
```
becomes:
```
foo(gParam, gParam_t);
```
This is exactly how the current AST-to-AST legalization handles mixed uniform and resource types, but the way it does it involves some annoying kludges:
- That pass has a notion of a "tuple" similar to our legalization, but every tuple has an optional "primary" entry for all the uniform data, plus tuple elements for the resources, and a given field may be represented on one side, the other, or both. It makes the code for handling tuples very messy.
- That pass does the "stripping" of types by actually marking up the AST declarations (this is okay because it is constructing a new AST as it goes), so that when they get emitted certain fields don't actually show up. That is, we fix the problem with type `P` by actually *modifying* the user's declaration of `P`. That seems out of bounds for the IR.
This change fixes the problem in our IR type legalization while trying to avoid the problems of the AST-to-AST pass by using two new ideas:
1. We add a new case for `LegalType` (and `LegalVal`) that is a "pair" type, where a pair consists of both an "ordinary" type (for uniform data) and a "special" type (for resource data). E.g., after legalization, the type for `C` (which can be over-simplified to `ConstantBuffer<P>` for our purposes), will be a `LegalType::pair` where the ordinary side is `ConstantBuffer<P_stripped>` and the special side is a tuple containing the `Texture2D` field.
2. We add a new (and annoyingly hacky) AST-level type called `FilteredTupleType` which is semantically a sort of tuple type (it holds a list of elements, and the elements have their own types), but which remembers an "original type" that it was created from, and for each element remembers the field of the original type that it corresponds to. This is used to construct a type like `P_stripped` as an actual AST-level structural type.
The core logic for legalizing an aggregate type had to get more complicated just because of the new pair case, so there is now a `TupleTypeBuilder` that asists with taking an aggregate type, processing its fields, and then picking the right `LegalType` representation for the result.
Other smaller changes:
- Made the legalization logic actually legalize `PtrType<T>`. E.g., if `T` legalizes to a tuple, we need to construct a tuple of pointer types. The same exact thing needs to be applied to arrays, and any other generic type that should "distribute over" pairs/tuples.
- Made the legalization logic actually legalize `ConstantBuffer<T>` and similar. The basic idea there is if `T` maps to a pair, we wrap `ConstantBuffer<...>` around the ordinary side, and `implicitDeref` around the special side.
- Removed a bunch of `#ifdef`ed-out code from the end of `ir-legalize-types.cpp`. That was code from my first attempt at legalization that failed miserably (trying to do it via local changes and a work list instead of a global rewrite pass), but it had some code I wanted to reference when writing the version that actually got checked in (should have deleted the code earlier, though).
- Added a bunch of cases for `LegalType::none` (and the `LegalVal` equivalent) that helped simplify the logic fo the `pair` case by allowing me to *always* dispatch to both the "ordinary" and "special" sides, even if they might not actually be present.
- Renamed `TupleType` and `TupleVal` over to `TuplePseudoType` and `TuplePseudoval` to recognize the fact that we might actually need/want *real* tuples in the type system, to go along with these fake ones (that need to be optimized away).
The biggest doubt I have about this change is the whole `FilteredTupleType` thing; it seems like an obviously contrived type to add to the front-end type system that really only solves IR-level problems. A cleaner approach might have been to just add a plain old `TupleType` to the front-end type system (and initially I started with that), and then have yet another `LegalType`/`LegalVal` case that handles mapping from the fields of the original type to the numbered tuple elements.
I expect we'll actually want to make that change in the future (especially if we ever add true tuples to the front-end), but for right now I let myself be swayed by the desire to have these stripped/filtered types get names that explain their provenance ("where they came from") to make our output code more debuggable. The way I've done it is probably overkill, though, and we need a much more complete effort on the readability and debuggability of our output before anything like that is worth worrying about.
* Fixup: typo
* Fixup: fix output of "non-mangled" names for test cases
- Make sure to attach high-level decls to variables created as part of type legalization
- Also, try to share more of the code between the different cases of variables
- Fix up `parameter-blocks` test case that was passing `-no-mangle` but expecting mangled names in the output
- Fix up `multiple-parameter-blocks` to not rely on `-no-mangle` for now, because it would lead to two global variables with the same name (need to fix that underlying issue eventually).
- Also fix name generation logic so that we only use "original" names (from high-level decls) specifically when the `-no-mangle` flag is on, and otherwise use IR-level names.
* Fix: handle constant buffers better in render-test
- Don't request both CB and SRV usage for buffers, since that is illegal
- Also, don't try to create an SRV when user requested a CB (since the required usage flag won't be there)
- Record the input buffer type on the `D3DBinding` for a buffer, and use that to tell us when to bind a CB instead of SRV/UAV
- Fix expected output for `cbuffer-legalize` test now that we are actually feeding it correct cbuffer dta.
|
|
- Change function mangling so we use `p<parameterCount>p` instead of just `p<parameterCount>` to avoid the parameter count running into digits at the start of a mangled type name and tripping up the un-mangling logic.
- We really need to step back at some point and define our mangling scheme a bit more carefully, especially if we are going to keep going down this road where un-mangling things is important for generating HLSL output.
- Also allow the unmangling logic to unmangle a few more cases of generic parameters, so that it can skip over them to get to the parameter count of the underlying function.
- Add a notion of an `unreachable` instruction to the IR, and emit it as the terminator (if needed) at the end of the last block for a function with a non-void return type.
- This does *not* implement any logic to emit a diagnostic if the `unreachable` turns out to be potentially reachable
- Fix a bug in IR specialization of generics where we can't create two different specializations of the same function, because both get registered in the same hash map
With all these fixes, testing in Falcor modified to use the full Slang compiler and IR for all HLSL/Slang:
- The UI and text rendering shaders yield HLSL that compiles without error; no idea if they actually *work*
- The ModelViewer shaders yield HLSL, but there are some issues (looks like type legalization isn't applying to stuff inside constant buffers)
|
|
* IR: add support for `switch` statements
Fixes #273
This is just something we hadn't gotten to yet on the IR. The actual design of the instruction is unsurprising (once you take into consideration the requirement for structured control flow). A `switch` instruction takes the form:
switch <condition> <breakLabel> <defaultLabel> [<caseVal> <caseLabel>]*
Where `condition` is the value to switch on, `breakLabel` is the "join point" after the original `switch` statement, `defaultLabel` is where to go if the value doesn't match any case, and each pair of `caseVal` and `caseLabel` is what to do on a particular value. It is required that `caseVal` be a literal, but this isn't currently being enforced in the IR (the front-end should be making a check and constant-folding the case labels).
For structured control flow, we also make the assumption that the cases are in order: cases with the same label must be grouped together, and any case that falls through to another must come right before it.
Given this representation, the emit logic can reconstruct a `switch` statement with relative ease, given the machinery we already have. It makes sure to group together case values with the same label (again, assuming they are contiguous), and will insert the `default:` label in with whatever group it belongs to.
Actually emitting code for a `switch` statement seems superficially simple, until you realize that a complete implementation needs to handle stuff like "Duff's Device." The current implementation makes the assumption that all `case` and `default` statements are directly nested under a `switch`, and that there is no way for control flow to enter a case except by the `switch` itself, or fall-through.
In order to facilitate the grouping of cases in the IR-to-HLSL emit logic, the AST-to-IR lowering logic tries to detect cases where there are multiple `case`s in a row, and emit only a single label for them.
One big/annoying gotcha is that we don't properly handle the case where a `default:` case has a non-trivial fall-throguh to another case. That seems fine for now since HLSL doesn't support fall-through anyway, but it probably needs to get detected somewhere in the Slang compiler (e.g., maybe we should add a diagnostic pass over the IR that detects target-specific problems like that and emits errors).
* IR: Add support for empty statements.
- Add empty statement in `lower-to-ir.cpp`
- Go ahead and eliminate the statement catch-all and explicitly enumerate the cases we don't support
- Fix up parser for block statements so that it doesn't leave a null statement as the body of a `{}`
- Add an empty statement to one of the cases for the `switch` test, to ensure we are testing empty statements
|
|
* Don't auto-enable IR use for compute tests
The `COMPARE_COMPUTE` and `COMPARE_RENDER_COMPUTE` test fixtures were set up to always enable the `-use-ir` flag on Slang, which precludes having any tests that confirm functionality on the old non-IR path (which is still required by our main customer).
This change adds the `-xslang -use-ir` flags explicitly to any compute test cases that left them out, and makes the fixture no longer add it by default.
* Continue building out parameter block support
The initial front-end logic for parameter blocks was already added, but they are still missing a bunch of functionality. This change addresses some of the known issues:
- Bug fix: don't try to emit HLSL `register` bindings for variables that consume whole register spaces/sets
- Overhaul type layout logic so that it can make decisions based on a given code generation target (currently passed in as a `TargetRequest`), which allows us to decide whether or not a parameter block should get its own register set on a per-target basis.
- Always use a register space/set for Vulkan
- Never use a register space/set for HLSL SM 5.0 and lower
- By default, don't use register spaces/sets for HLSL output
- Add a command-line flag and some "target flags" to enable register-space usage for D3D targets
- Hackily add initial support for parameter blocks in the AST-to-AST path
- This just blindly lowers `ParameterBlock<T>` to `T`, which shouldn't quite work
- A more complete overhaul will probably need to wait until the AST-to-AST legalization is changed to use the `LegalType`s from the IR legalization pass.
- Add a compute-based test case to actually run code using parameter blocks
- This file runs test cases both with and without the IR
|
|
* IR: Add support for break and continue statements
The front-end is already doing the work of connecting this statements to their "parent" statement, so we just needed to build a map from the `Stmt*` to the corresponding `IRBlock*`s to use for break/continue when outputting any loop statement, and then look up in the map for the branch target when outputting a break/continue.
When we get around to adding `switch` statements, the same pattern should work just fine.
I also added support for `do/while` statements in IR codegen, and made sure to exercise those in one of the test cases I added.
There is also an unrelated IR codegen fix for when there is a "bound subscript" on the RHS of an assignment.
* IR: fix handling of do/while and continue
Thanks to @csyonghe for pointing out my mistake in the earlier commit.
I implemented `continue` for `do/while` loops incorrectly, branching to the head of the loop instead of the loop test.
I'll try to blame this mistake on the fact that I never use `do/while` loops because I think they are awful. :)
The fix for that issue wasn't too bad (see `lower-to-ir.cpp`) but it surfaces a much more serious issue: I wasn't actually implementing `continue` correctly *at all* when it comes to generating HLSL/GLSL from the IR (I can't easily make an excuse for that one).
The basic issue at the heart of this is that given an input statement like:
```
for(int ii = 0; ii < N; ii = doSomething(ii))
{ ... }
```
The continue clause (`ii = doSomething(ii)`) could expand into many instructions (across multiple blocks, if we inline), and there is in general no guarantee when we are done that we can package up that code as an expression and spit out a new `for` loop (the same basic argument applies to a `do { ... } while(someComplexExpression())`.
So, if we assume that in general we have to generate a full *statement* for the `continue` clause, what can we emit?
- We could try to "outline" the continue code into its own function, so that we can call it from an expression. That could work, but has high implementation complexity.
- We could introduce additional `bool` variables for control flow, outputting something like:
```
bool useContinueBlock = false;
for(;;) {
if(useContinueBlock) { <CONTINUE CODE>; }
useContinueBlock = true;
<LOOP TEST>
<LOOP BODY>
}
```
This works but user might balk at the extra variable we introduce.
- We could duplicate the code at each continue site. That is, we emit the loop as:
```
for(;;) {
<LOOP TEST>
<LOOP BODY>
<CONTINUE CODE>
}
```
but then whenever we'd like to emit `continue;` we instead emit `{ <CONTINUE CODE>; continue; }`.
This doesn't introduce any extra variables, but it causes code duplication (limited, if we don't have too many `continue` sites, and the continue clause is small - which are the common cases).
When I was initially working on the IR codegen I picked that last option just because it is what `fxc` seems to do, but I neglected to actually *implement* the special-case codegen for a `continue` instruction. This change addresses that (see `emit.cpp`).
Finally, once things were fixed the `continue` test case produced the results Yong told me to expect, but it also produced a warning from the downstream HLSL compiler ("hey, your loop doesn't ever actually *loop*!"), so I reworked the test back to one that actually loops (but still tests `continue`).
As a final aside in this essay of a commit message: the current IR representation of control flow uses special-case instructions for various cases of unconditional branch (and two variations on `if`), but these are not strictly necessary, and a future change will hopefully clean it up. The biggest catch in doing that is that it will require the IR->source codegen to carefully track which blocks represent which kinds of branch targets in context (e.g., you can't assume that a `continue` that nees the special handling above will appear as a distinct kind of instruction).
|
|
- Add definition of `discard` instruction
- A `discard` is a terminator instruction, just like `returnVoid`
- Lower `DiscardStmt` in AST to a `discard` instruction in the IR
- Emit `discard` instruction as a `discard;` statement when emitting HLSL/GLSL
- Add a test case using the "graphics compute" mode that tests discard. The test writes to one entry in a UAV before doing a conditional (always true at runtime) discard, and then writes to another entry; we expect to see the results of the first write, but not the second.
|
|
* improve diagnostic messages and prevent fatal errors from crashing the compiler.
* fix top level exception catching.
* spelling fix
* change wording of invalidSwizzleExpr diagnostic
* add speculative GenericsApp expr parsing
* add new test case of cascading generics call.
* Fixing bugs in compiling cascaded generic function calls.
Add implementation of DeclaredSubTypeWitness::SubstituteImpl()
This is not needed by the type checker, but needed by IR specialization. When input source contains cascading generic function call, the arguments to `specialize` instruction is currently represented as a substitution. The arg values of this subsittution can be a `DeclaredSubTypeWitness` when a generic function uses one of its generic parameter to specialize another generic function. When the top level generics function is being specialized, this substitution argument, which is a `DeclaredSubTypeWitness`, needs to be substituted with the witness that used to specialize the top level function in the specialized specialize instruction as well.
* add a test case for cascading generic function call.
* parser bug fix
* fixes #255
* add test case for issue #255
* Generate missing `specialize` instruction when calling a generic method from an interface constraint.
When calling a generic method via an interface, we should be generating the following ir:
...
f = lookup_interface_method(...)
f_s = specailize(f, declRef)
...
This commit fixes this `emitFuncRef` function to emit the needed `specialize` instruction.
* fixes #260
This fix follows the second apporach in the disucssion. It generated mangled name for specialized functions by appending new substitution type names to the original mangled name.
* Disabling removing and re-inserting specailized functions in getSpecalizeFunc()
I am not sure why it is needed, it seems HLSL and GLSL backends are generating forward declarations anyways, so the order of functions in IRModule shouldn't matter.
* cleanup and complete test cases.
* fix warnings
|
|
|
|
- During IR emit, treat a "select" expression (`?:` operator) like any other `InvokeExpr`, since it will have an `__intrinsic_op` modifier attached to turn it into a `select` instruction.
- During HLSL/GLSL emit from IR, turn a `select` instruction into a `?:` expression
- Also add support for the `neg` instruction during HLSL/GLSL emit
Note that right now we are assuming HLSL semantics for `?:` where it does not short-circuit. Correctly handling the GLSL case would require going back to special-case codegen for `SelectExpr`, but we can cross that bridge when we come to it.
|
|
The IR encodes `out` and `in out` function parameters as pointer types, so the emit logic needs to handle it. We had code to handle translation of pointers types into `out` declarations for function *declarations* but weren't handling it for function *definitions*.
This change unifies the logic so that it is shared by function definitions and decalrations.
This change does *not* deal with the following issues that need to be addressed sometime soon-ish:
- We currently always translate pointers into `out`, even if they should be `in out`. This is obviously wrong.
- If/when we eventually have targets that support true pointers (e.g., CUDA, NVIDIA OpenGL, etc.) we'll need a way to tell the difference between an `in` pointer parameter, and an `out` parameter.
Both of these issues are meant to be addressed by having a few special cases of pointer types, for the `out` and `in out` cases, and only translating those (not all pointers). We need to plumb those through the IR more completely, but I'm not dealing with that here.
|
|
The old approach was relying on an `__intrinsic_op` modifier to tell us we need to do something special with an `InvokeExpr`, but a previous change removed a bunch of those modifiers.
Instead, we will now check for calls to subscript declarations as part of the normal flow of emitting *any* call, similar to what is done for constructor calls already.
Eventually we should be able to eliminate the special case in the `__intrinsic_op` path, but I'm holding off on that because the AST emit logic can probably be cleaned up a *lot* once it doesn't have to be used for cross-compilation as well.
|
|
This code isn't especially useful right now since most of the important subscripts are still special-cased with `__intrinsic_op`, but the idea is that if we de-mangle an intrinsic operation's name and see it is called `operator[]` then we are probably calling a subscript, and should emit an appropriate expression.
Aside: this change has pointed out to me that our current name mangling isn't properly handling non-alphanumeric characters, so we'll be in trouble as soon as we have non-intrinsic subscripts, operators, etc.
|
|
The source of a lot of these changes is that our current strategy for dealing with "builtin" operations when emitting HLSL from the IR is to de-mangle the mangled name of an operation, and then emit HLSL code for a function call to an operation with that de-mangled name.
This change introduces a few fixups for that work:
- It adds support for parsing the mangled names of generics (specialized and unspecialized)
- It adds logic for detecting when the operation being invoked is a member function
- This is currently a bit ugly, since we compare the number of actual arguments we have in the IR against the number of parameters declared for the callee, and if they don't match we assume we have an extra `this` argument.
On the mangling side, we add (hacky) support for mangling a function name when its types involve generic parameters, e.g.:
```
__generic<T, let N : int> T length(vector<T,N> v);
```
In this case the mangled name of the function needs to include a mangling for the type `vector<T,N>` which means it also needs to include a mangling for `N`.
The reason I describe this support as "hacky" is because we really shouldn't be reproducing the names `T` or `N` in the mangled symbol name. By doing so we make it so that a user changing the name of a generic parameter would break (IR) binary compatibility with existing code that was separately compiled.
I've included comments in the code about a better way to handle this, but it isn't a priorit right now since binary compatibility isn't something meaningful until we start emitting usable bytecode modules.
|
|
* Rename existing ParameterBlock to ParameterGroup
We are planning to add a new `ParameterBlock<T>` type, which maps to the notion of a "parameter block" as used in the Spire research work.
Unfortunately, the compiler codebase already uses the term `ParameterBlock` as catch-all to encompass all of HLSL `cbuffer`/`tbuffer` and GLSL `uniform`/`buffer`/`in`/`out` blocks (all of which are lexical `{}`-enclosed blocks that define parameters...).
This change instead renames all of the existing concepts over to `ParameterGroup`, which isn't an ideal name, but at least doesn't directly overlap the new terminology or any existing terminology.
The new `ParameterBlockType` case will probably be a subclass of `ParameterGroupType`, since it is a logical extension of the underlying concept.
* Add Shader Model 5.1 profiles
The HLSL `register(..., space0)` syntax is only allowed on "SM5.1" and later profiles (which is supported by the newer version of `d3dcompiler_47.dll` that comes with the Win10 SDK, but not the older version of `d3dcompiler_47.dll` - good luck figuring out which you have!).
This change adds those profiles to our master list of profiles, and nothing else.
* First pass at support for `ParameterBlock<T>`
- Add the type declaration in stdlib
- Add a special case of `ParameterGroupType` for parameter blocks
- Handle parameter blocks in type layout (currently handling them identically to constant buffers for now, which isn't going to be right in the long term)
- Add an IR pass that basically replaces `ParameterBlock<T>` with `T`
- Eventually this should replace it with either `T` or `ConstantBuffer<T>`, depending on whether the layout that was computed required a constant buffer to hold any "free" uniforms
- Add first stab at an IR pass to "scalarize" global variables using aggregate types with resources inside.
- This currently only applies to global variables, so it won't handle things passed through functions, or used as local variables
- It also only supports cases where the references to the original variable are always references to its fields, and not the whole value itself
- Add a single test case that technically passes with this level of support, but probably isn't very representative of what we need from the feature
* Fold parameter-block desugaring into a more complete "type legalization" pass
The basic problem that was arising is that once you desugar `ParameterBlock<T>` into `T`, you then need todeal with splitting `T` into its constituent fields if it contains any resource types.
Handling those transformations by following the usual use-def chains wasn't really helping, because you might need systematic rewriting that can really only be handled bottom-up.
This change adds a new pass that is intended to perform multiple kinds of type "legalization" at once:
- It will turn `ParameterBlock<T>` into `T`
- It may at some point also convert `ConstantBuffer<T>` into `T` as well
- It will turn an value of an aggregate type that contains resources into N different values (one per field)
- As a result of this, it will also deal with AOS-to-SOA conversion of these types
Legalization is applied to *every* function/instruction/value, so that it can make large-scale changes that would be tough to manage with a work list.
This pass needs to be run *after* generics have been fully specialized, so that we know we are always dealing with fully concrete types, so that their legalization for a given target is completely known.
This is still work in progress; there's more to be done to get this working with all our test cases, and finish the remaining `ParameterBlock<T>` work.
* Improve binding/layout information when using parameter blocks
- When doing type layout for a parameter block, don't include the resources consumed by the element type in the resource usage for the parameter block
- Note that this is pretty much identical to how a `ConstantBuffer<T>` does not report any `LayoutResourceKind::Uniform` usage, except that `ParameterBlock<T>` is *also* going to hide underlying texture/sampler reigster usage
- The one exception here is that any nested items that use up entire `space`s or `set`s those need to be exposed in the resource usage of the parent (I don't have a test for this)
- When type legalization needs to scalarize things, it must propagate layout information down to the new leaf variables. In general, the register/index for a new leaf parameter should be the sum of the offsets for all of the parent variables along the "chain" from the original variable down to the leaf (we aren't dealing with arrays here just yet).
- When type legalization decides to eliminate a pointer(-like) type (e.g., desugar `ParameterBlock<T>` over to `T`), actually deal with that in terms of the `LegalVal`s created, so that we can know to turn a `load` into a no-op when applied to a value that got indirection removed.
- Hack up the "complex" parameter-block test so that it actually passes (the big hack here is that the HLSL baseline is using names that are generated by the IR, and are unlikely to be stable as we add/remove transformations).
- Note: I can't make these be compute tests right now, because regsiter spaces/sets are a feature of D3D12/Vulkan, and our test runner isn't using those APIs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
correctly mangled function.
|
|
|
|
|
|
|
|
|
|
There were some cases where we would try to emit an `ErrorType` to the output HLSL, which obviously isn't allowed. This change tries to avoid emitting error types, and instead use the original expression when it is available.
I tried adding a test case for the change, but I can't convince Slang to output matching line numbers for the error message; it seems like more work is needed on that front.
|
|
This is the first step towards supporting traditional object-oriented method definitions; the second step will be to allow `this` expressions to be implicit.
- Add a test case using explicit `this`, and expected output
- Update parsing logic for expressions so that it handled identifiers similarly to the declaration and statement logic: first try to parse using a syntax declaration looked up in the curent scope, and otherwise fall back to the ordinary `VarExpr` case.
* As long as I'm making that change: switch `true` and `false` to be parsed via the callback mechanism rather than be special-cased.
* This change will also help out if we ever wanted to add `super`/`base` expressions, `new`, `sizeof`/`alignof` or any other expression keywords.
- Add a `ThisExpr` node and register a parser callback for it.
- Add semantic checks for `ThisExpr`: basically just look upwards through scopes until we find either an aggregate type declaration or an `extension` declaration, and then use that as the type of the expression.
- TODO: eventually we need to guard against a `this` expression inside of a `static` member.
- The IR generation logic already handled creation of `this` parameters in function signatures; the missing piece was to register the appropriate parameter in the context, so that we can use it as the lowering of a `this` expression.
|
|
This change includes a lot of infrastructure work, but the main point is to allow code like the following:
```
// define an interface
interface Helper { float help(); }
// define a generic function that uses the interface
float test<T : Helper>( T t ) { return t.help(); }
// define a type that implements the interface
struct A : Helper { float help() { return 1.0 } }
// define an ordinary function that calls the
// generic function with a concrete type:
float doIt()
{
A a;
return test<A>(a);
}
```
Getting this to generate valid code involves a lot of steps. This change includes the initial version of all of these steps, but leaves a lot of gaps where more complete implementation is required.
The changes include:
- Member lookup on types has been centralized, and now handles the case where the type we are looking for a member in is a generic parameter (e.g., given `t.help()` we can now look up `help` in `Helper` by knowing that `t` is a `T` and `T` conforms to `Helper`).
- There is an obvious cleanup still to be done here where the same exact logic should be used to look up available "constructor" declarations inside a type when the type is used like a function.
- Add a notion of subtype constraint "wittnesses" to the type system. When a generic is declared as taking `<T : Helper>` it really takes two generic parameters: the type `T` and a proof that `T` conforms to `Helper`. The actual arguments to a generic will then include both the type argument and a suitable witness argument (both type-level values).
- As it stands right now, a witness wraps a `DeclRef` to the declaration that represents the appropriate subtype relationship. So if we have `struct A : Helper`, that `: Helper` part turns into an `InheritanceDecl` member, and a reference to that member can serve as a witness to the fact that `A` conforms to `Helper`.
- Make explicit generic application `G<A,B>` synthesize the additional arguments that represent conformances required by the generic.
- This does *not* yet deal with the case where a generic is implicitly specialized as part of an ordinary call `G(a,b)`
- A bug fix to not auto-specialize generics during lookup. The problem here was related to an attempted fix of an earlier issue.
During checking of a method nested in a generic type, we were running into problems where `DeclRefType::create()` was getting called on an un-specialized reference to `vector`, and this was leading to a crash when the code looked for the arguments for the generic. This was worked around by having name lookup automatically specialize any generics it runs into while going through lookup contexts.
That choice creates the problem that in a generic method like this:
```
void test<T>(T val) { ... }
```
any reference to `val` inside the body of `test` will end up getting specialized so that it is effectively `test<T>::val`, when that isn't really needed.
- Add front-end logic to check that when a type claims to conform to an interface it actually must provide the methods required by the interface. The checking process goes ahead and builds a front-end "witness table" that maps declarations in the interface being conformed to over to their concrete implementations for the type.
- At the moment the checking is completely broken and bad: it assumes that *any* member with the right name is an appropriate declaration to satisfy a requirement. That obviously needs to be fixed.
- Add an explicit operation to the IR for lookup of methods: `lookup_interface_method(w, r)` where `w` is a reference to the "witness" value and `r` is an `IRDeclRef` for the member we want to look up.
- Add an explicit notion of witness tables to the IR. These end up being the IR representation of an `InheritanceDecl` in a type, and they are generated by enumerating the members that satisfy the interface requirements (which were handily already enumerated by the front-end checking). The witness table is an explicit IR value, and so it will be referenced/used at the site where conformance is being exploited (e.g., as part of a `specialize` call), so it should be safe to eliminate witness tables that are unused (since they represent conformances that aren't actually exploited). Similarly, the entries in a witness table are uses of the functions that implement interface methods, and so keep those live.
- In order to implement the above, I did a bit of a cleanup pass on the IR representation so that there is an `IRUser` base that `IRInst` inherits from, so that we can have users of values that aren't instructions.
- One annoying thing is that because of how types and generics are handled in the IR, we needed a way to have a type-level `Val` that wraps an IR-level value: e.g., to allow an IR-level witness table to be used as one of the arguments for specialization of a generic. The design I chose here is to have a "proxy" `Val` subclass (`IRProxyVal`) that wraps an `IRValue*`. These should only ever appear as part of types and `DeclRef`s that are used by the IR.
- One annoying bit here is that an IR value might then have a use that is not manifest in the set of IR instructions, and instead only appears as part of a type somewhere.
- I'm not 100% happy with this design, but it seems like we'd have to tackle similar issues if/when we eventually allow functions to have `constexpr` or `@Constant` parameters
- Make generic specialization also propagate witness table arguments through to their use sites (this is mostly just the existing substitution machinery, once we have `IRProxyVal`), and then include logic to specialize `lookup_interface_method` instructions when their first operand is a concrete witness table.
All of this work allows a single limited test using generics with constraints to pass, but more work is needed to make the solution robust.
|
|
|
|
inputs for running test shaders with arbitrary parameter definitions.
This commit contains the parser of the resource input definition.
|
|
* Fix up emission of shader parameter semantics when using IR
- Make sure to propagate entry point parameter layouts down to IR parameters when doing the initial cloning to form target-specific IR
- When layout information is present on an IR node, prefer to use that over the original high-level declaration for outputting semantics in final HLSL
- Fix up test runner to generate `.actual` files when running compute tests, in cases where the `render-test` application errors out (e.g., because of a Slang compilation error)
- Add a first test of generics functionality, to show that they generate valid code through the IR
- Right now this test is *not* using any "interesting" operations on the type parameter, so this is not a test that can confirm that interface constraints work
* fixup: skip compute tests when running on Linux
|
|
There was already a pass in place that transformed parameters and results of an entry-point function into global variables for GLSL, but this pass would just turn a `struct`-type parameter into a `struct`-type global, which has two problems:
- The standard GLSL language doesn't seem to allow `struct` types as vertex shader inputs or fragment shader outputs.
- If there are any members in such a `struct` that represent "system value" inputs or outputs, then these would need to be transformed into the equivalent `gl_*` variables.
This change adds a more complete scalarization process that applies to inputs/outputs during the legalization pass. In order to support this there is a little bit of a data strcuture for abstracting over tuples of values (this same idiom is used in a few other places, so perhaps the implementation could be done once and shared?).
System values are current handled in a painfully ad hoc (and incomplete) fashion during code emit. We need to come up with a better solution for mapping HLSL `SV_*` semantics over to `gl_*` variables.
In some cases this mapping might introduce more code than we can easily deal with during emit time, so it probably needs to be handled back at the IR level.
This implementation has many gaps, but it appears to be enough to get teh `render/cross-compile-entry-point` test working with IR-based cross-compilation.
|
|
There are two big changes here:
- Add logic during the initial IR cloning pass for an entry point + target that tries to pick the best possible version of any target-overloaded function. This allows us to pick the intrinsic version of `saturate()` when compiling for HLSL output, but then pick the non-intrinsic version (that is implemented in terms of `clamp()`) when targetting GLSL.
- Add an initial specialization pass that tries to deal with generics. This required some fixing work to IR generation, so that we correctly generate explicit operations to specialize a generic for specific types (this is currently implemented as a `specialize` instruction that takes the generic to specialize plus a declaration-reference that represents the specialized form). With that work in place, we can scan for `specialize` instructions inside of non-generic functions, and use them to trigger generation of specialized code. We rely on the name-mangling scheme to help us find pre-existing specializations when possible.
There are also a bunch of cleanups encountered along the way:
- Don't use the explicit `layout(offset=...)` for uniforms, because it isn't supported by all current drivers. For now we will just assume that our layout rules compute the same values that the driver would for un-marked-up code. We can come back later and try to implement a workaround in the cases where this doesn't apply (e.g., by re-running the layout logic as part of emission, and dropping layout modifiers from variables that don't need explicit layout).
- Fix some issues in IR dump printing so that we print function declarations more nicely.
- Testing: print out failing pixel when image-diff fails
|
|
The big addition here is that the Slang "bytecode" is no longer treated as just a "code generation target" (`CodeGenTarget`) akin to DX bytecode (DXBC) or SPIR-V, but instead is a `ContainerFormat` that can be used to emit all the results of a compile request (well, currently just the IR-as-BC, but the intention is there).
Getting to this goal involved some prior checkins that eliminated bogus "targets" that weren't really akin to SPIR-V or DXBC: `-target slang-ir-asm` and `-target reflection-json`. Those targets were really in place to support testing, and so they've been made more explicit testing/debug options.
This change eliminates `-target slang-ir` and instead tries to allow the user to specify `-o foo.slang-module` as an output file name, that indicates the intention to output a "container" file that will wrap up all the generated code.
I've also gone ahead and generalized the existing `-target` option so that we are actually building up a *list* of code generation targets. This is largely just a cleanup, since it forces code to be more aware of when it is doing something target-specific vs. target independent. For example, reflection layout information lives on a requested target, and not on the compile request as a whole, and similarly output code is per-target, per-entry-point.
As a cleanup, I eliminated support for per-translation-unit output. This was vestigial code from back when I used to try and do HLSL generation for a whole translation unit instead of per-entry-point (which turned out to be a lot of complexity for little gain), and it was only being used in the `hello` example and the `render-test` test fixture - in both cases fixing it up was easy enough. I've stubbed out the old `spGetTranslationUnitSource` API, but haven't removed it yet.
|
|
* Get rid of the `-slang-ir-asm` target
This is really only useful for debugging, so I've replaced the functionality with a `-dump-ir` command line option (which dump's the IR for an entry point before doing codegen).
* fixup: use HLSL target, not DXBC, so test can run on Linux
|
|
* Bug fix: emit logic for `do` loops
This case was never tested, and I was outputting some garbage characters. This comit fixes the codegen and adds a test case.
* Bug fix: make sure to pass through `[allow_uav_condition]`
This also fixes the standard library definition of `IncrementCounter()` so that it returns a `uint` instead of `void`.
|
|
Given an input declaration like:
cbuffer C
{
int a = -1;
}
Slang was automatically generating a `packoffset` semantic to place the member manually, but was emitting it *after* the initializer of the original declaration:
cbuffer C : register(b)
{
int a = -1 : packoffset(c0);
}
That syntax is invalid, of course, and we actually want:
cbuffer C : register(b)
{
int a : packoffset(c0) = -1;
}
This wasn't spotted earlier because putting initializers on a `cbuffer` member is not commonly done, since it requires reading those values via the reflection API. Slang's reflection API currently provides no way to access default values like this, so they aren't of much use yet. Still, it is better to emit correct syntax even in cases like this one.
|
|
When outputting GLSL from a Slang or HLSL entry point, we need to translate any parameters or results of an entry-point function into global declarations of `in` or `out` parameters, as needed by GLSL.
This change adds these transformations at the IR level, so that they don't need to complicate the emit logic.
More detailed changes:
- Make `render0` test use IR. It passes out of the box.
- Fix test runner to not always dump diffs on failures
I accidentally initialized an option to `true` instead of `false` when working on debugging the Travis CI failures.
- Special-case output for component-wise multiplication to handle GLSL `matrixCompMul()`
- Handle GLSL vs. HLSL output for calls to `mul()`
- Output proper `layout(std140)` on GLSL constant buffer declarations
- Require appropriate GLSL extension when emitting explicit `layout(offset = ...)` on constant buffer members
- TODO: Need to avoid requiring this extension in cases where the offsets are what would be computed anyway.
Realistically, should probably be emitting code with explicit padding, etc. to guarantee layouts.
- Add an IR-based pass to translate entry point functions by eliminating their input/output parameters and replacing them with global variables.
- Demangle names when calling target intrinsics
The lowering to the IR will turn a call like `sin(foo)` into a call to a function declaration with a mangled name like `_S3sin...`. This works fine when the user is calling their own functions, since the name mangling will apply to both the definition and use sites, but for builtin functions it obviously isn't what we want.
This change makes it so that we demangle the name of an instrinsic function just enough so that we can extract the original simple name, and make a call using that.
These changes do nor provide 100% of what we need when translating to GLSL, so the `cross-compile-entry-point` test *still* hasn't been flipped over to use the IR (even though that is the test case I've been using to develop these changes).
|
|
The main change I was working on here was to start having more of the builtin functions (in this case, `cos`, `sin`, and `saturate`) just lower to the IR as calls to builtin functions (with declarations but no definition), rather than expect/require them to map to individual IR opcodes in every case.
The main change there was the removal of some `intrinsic_op` modifiers in the stdlib. This then requires the `isTargetInstrinsic` logic in IR-based code emit to avoid emitting declarations for these intrinsics.
The corresponding logic for emitting *calls* to these intrinsics is currently being skipped.
Along the way, a variety of fixups were added:
- In order to support lowering to GLSL, we need to handle cases where a variable/function name uses a GLSL reserved word. The right long-term fix there is to always use generated or mangled names, but for now I'm hacking it by adding a `_s` prefix to all names during IR-based emit.
- This needs a flag to disable it, since some of our tests currently rely on checking binding information from generated HLSL/SPIR-V that will include these mangled/modified names.
- Emit matrix layout modifiers appropriately for GLSL
- Specialize IR parameter-block emission between GLSL and HLSL
- Fix up argument count/index logic for a couple of opcodes that weren't fixed when removing the types from the explicit operand list
- Fix up IR generation for calls to declarations with generic arguments. We were briefly adding the generic args to the ordinary argument list, which added complexity in several places. We now rely on the declaration-reference nodes in the IR to carry that extra info.
- TODO: We actually need to make sure that this is the case, since we don't currently correctly generated specialized decl-refs when building IR for function calls
The main test that would have been affected by this is `cross-compile-entry-point`, but I was not able to get that working fully with the IR. The main problem in this case was that when emitting GLSL we will need to perform certain required transformations on the IR to get legal code for GLSL. Notably:
- We need to hoist entry-point parameters away from being function parameters, and make them be global variables. This is currently being hand-waved during the emit logic, but it seems way better to have it all get cleaned up in the IR first.
- We need to scalarize entry-point parameters, because structure input/output is not supported as vertex input or fragment output (and it may be best to always scalarize anyway, to match HLSL semantics). (Note: "scalarize" here means to bust up structures, but not matrices/vectors)
|
|
* IR: overhaul IR design/implementation
Closes #192
Closes #188
This is a major overhaul of how the IR is implemented, with the primary goal of just using the AST-level type representation as the IR's type representation, rather than inventing an entire shadow set of types (as captured in issue #192).
One consequence of this choice is that types in the IR are no longer explicit "instructions" and are not represented as ordinary operands (so a bunch of `+ 1` cases end up going away when enumerating ordinary operands).
Along the way I also got rid of the embedded IDs in the IR (issue #188) because this wasn't too hard to deal with at the same time.
Another related change was to split the `IRValue` and `IRInst` cases, so that there are values that are not also instructions. Non-instruction values are now used to represent literals, references to declarations, and would eventually be used for an `undef` value if we need one. IR functions, global variables, and basic blocks are all values (because they can appear as operands), but not instructions.
The main benefit of this approach is that the top-level structure of a bytecode (BC) module is much simpler to understand and walk, and BC-level types are represented much more directly (such that we could conceivably use them for reflection soon).
* fixup: 64-bit build fix
* fixup: try to silence clang's pedantic dependent-type errors
* fixup: bug in VM loading of constants
|
|
* First attempt at a Linux build
- Fix up places where C++ idioms were written assuming lenient behavior of Microsoft's compiler
- Add a few more alternatives for platform-specific behavior where Windows was the only platform accounted for.
- Add a basic Makefile that can at least invoke our build, even if it isn't going good dependency tracking, etc.
- Build `libslang.so` and `slangc` that depends on it, using a relative `RPATH` to make the binary portable (I hope)
- Add an initial `.travis.yml` to see if we can trigger their build process.
* Fixup: const bug in `List::Sort`
I'm not clear why this gets picked up by the gcc *and* clang that Travis uses, but not the (newer) gcc I'm using on Ubuntu here, but I'm hoping it is just some missing `const` qualifiers.
* Fixup: reorder specialization of "class info"
Clang complains about things being specialized after being instantiated (implicilty), and I hope it is just the fact that I generate the class info for the roots of the hierarchy after the other cases. We'll see.
* Fixup: add `platform.cpp` to unified/lumped build
* Fixup: Windows uses `FreeLibrary`
and not `UnloadLibrary`
* Fixup: fix Windows project file to include new source file
This obviously points to the fact that we are going to need to be generating these files sooner or later.
|
